BFT Gate Motors and BFT Gate Automation Systems in UAE

BFT Gate Motors & Automation in UAE

BFT is an Italian automation manufacturer with a broad range of gate operators, electronic controls and access products. BFT systems are widely used for residential, commercial and industrial gate automation, with product families covering compact residential motors through to heavier-duty operators and advanced control electronics.

Customers in Dubai, Sharjah, Abu Dhabi, Ajman, Ras Al Khaimah, Fujairah, Umm Al Quwain and Al Ain can source BFT automation products for new installations, system upgrades, maintenance and replacement requirements. A reliable result depends on selecting the motor, control electronics and accessories as one compatible system rather than choosing individual parts only by appearance or brand name.

Popular BFT Models & Products

The products below are drawn from the current catalogue on this website. Model availability can change, and different generations may use different control boards, receivers or accessories, so confirm the exact product code before ordering a replacement component.

• BFT HAMAL 600 Gate Motor Control Board in UAE
• BFT ALENA SW2 Gate Motor Control Board in UAE
• BFT ALPHA Gate Motor Control Board in UAE
• BFT COMPACTA A20-180 Photocell Sensor in UAE
• BFT D221073 Nylon Gear Rack 1M for Sliding Gate Motors Gate Motor Spare Part
• BFT EBP 24 Electric Lock for Swing Gate Motors Gate Motor Spare Part
• BFT GIOTTO 30 BT 3M Parking Gate Barrier UAE
• BFT LEO B CBB L02 Gate Motor Control Board in UAE

BFT Product Range in UAE

BFT automation can cover complete operators as well as the electronics, radio controls and safety devices used around the entrance. The exact range depends on the current catalogue and supported product generation.

• Sliding gates: DEIMOS and supported heavy-duty BFT sliding operator families.
• Swing gates: PHOBOS, ATHOS, KUSTOS, GIUNO, IGEA, VIRGO and related operators.
• Remote controls: MITTO transmitters and compatible CLONIX receiver products.
• Control boards: HAMAL, THALIA, SHYRA, ALENA, RIGEL, MERAK and model-specific electronics.
• Safety devices: COMPACTA, DESME and supported photocell products.
• Accessories & spare parts: RADIUS warning lights, locks, racks, releases and replacement components.

BFT Technology, Safety & Automation Features

BFT is known for technologies such as D-Track dynamic torque management and U-Link connectivity on supported products, together with 24V automation, encoder-based movement and configurable safety/access inputs. Availability depends on the exact model and control board generation.

• D-Track torque management on supported BFT systems for dynamic force control.
• U-Link connectivity on compatible products for integrated automation management.
• 24V low-voltage automation across many residential and intensive-use models.
• Encoder / obstacle-control functions where supported by the selected operator.
• Rolling-code radio control with compatible MITTO transmitters and BFT receivers.
• Programmable safety and access inputs for photocells, locks, GSM and external controls.

BFT Automation for Villas, Commercial & Industrial Sites

BFT automation is suitable for villas, residential compounds, offices, warehouses and commercial entrances. DEIMOS sliding motors are popular for residential and medium gates, while heavier sliding operators and PHOBOS, ATHOS, KUSTOS, GIUNO, IGEA and VIRGO swing families cover a wide range of gate sizes and installation geometries.

For residential gates, quiet movement, convenient remote access and straightforward safety integration are usually the main priorities. Commercial and shared entrances may need a higher daily cycle rating, faster recovery after repeated use and integration with keypads, GSM, intercoms or access-control systems. Industrial entrances can require heavier operators, stronger mechanical components and more conservative capacity selection.

How to Choose the Right BFT Gate Motor

For BFT sliding motors, check the true gate weight, rack/track condition and cycles per day. For PHOBOS, ATHOS, KUSTOS or other swing systems, confirm leaf length, hinge offset and post geometry. When replacing electronics, match the board type, motor voltage and accessories before ordering.

• Sliding gates: check gate weight, length, track/wheel condition, rack alignment and daily cycles.
• Swing gates: check the length and weight of each leaf, hinge condition, post geometry, wind loading and opening angle.
• Parking barriers: check boom length, required opening speed, traffic volume and access-control method.
• Garage automation: check door type, size, balance, travel and required pulling force.
• Replacement electronics: match the exact board, receiver, voltage, firmware generation and connected accessories.
• Safety equipment: plan compatible photocells, warning lights and other protection devices for the actual site.

BFT Remotes, Receivers, Control Boards & Spare Parts

In addition to complete gate operators, BFT systems may use remote controls, radio receivers, control boards, photocell sensors, flashing lights, key selectors, electric locks, gear racks, release devices and access-control interfaces. For replacement remotes or receivers, confirm the frequency and coding generation. For control boards and spare parts, the exact product code is especially important because similar-looking components may use different voltages, connectors or programming.

GSM, WiFi & Access-Control Integration

Many BFT gate and barrier control boards can be triggered by an external dry-contact relay, allowing compatible GSM gate openers, WiFi modules, keypads, intercoms, RFID readers or UHF vehicle readers to work with the automation. The control input and programming should be confirmed before connection, and safety logic should remain handled by the gate or barrier controller.

Professional Installation, Programming & Commissioning

Correct installation includes checking the gate or door mechanics first, mounting the operator securely, aligning racks or brackets, wiring the controller, setting limits or encoder travel, programming remotes and testing all safety devices. A motor should not be used to compensate for a gate that is binding, sagging or difficult to move manually. Professional setup helps protect the operator and improves long-term reliability.

Maintenance, Repair & Replacement Planning

Preventive checks should include mechanical movement, mounting points, manual release, safety sensors, warning devices, remote-control range and the condition of the control enclosure. If a BFT system develops repeated faults, identify the underlying mechanical, electrical or environmental cause before repeatedly replacing boards or parts. For older systems, compare the cost and availability of spare parts with the benefit of upgrading to a current compatible operator.

BFT Supply & Technical Support Across the UAE

We support BFT enquiries for villas, residential buildings, offices, schools, warehouses, factories, logistics sites and parking entrances throughout the UAE. For accurate selection, send the gate type, approximate weight or leaf length, daily usage, existing motor/controller model and a few clear site photos. Installation, programming and replacement-part support is available for supported products and locations.