BFT MITTO B RCB Remote Control – Detailed Product Introduction
The BFT MITTO B RCB Remote Control is a Italian-engineered gate remote control designed for handheld wireless control for compatible automatic entrance systems in the United Arab Emirates. The BFT MITTO B RCB model belongs to the BFT automation range and is intended for users who need dependable access to an existing supported receiver or automation control board. It can serve villas, residential compounds, commercial buildings, managed parking entrances and other facilities where the installed receiver supports this exact model.
Choosing the correct BFT MITTO B RCB is especially important when replacing a lost transmitter, adding a user, or maintaining multiple access points. Remote controls that look alike may use different radio frequencies, coding protocols, or receiver generations, so identical housing or matching brand names do not guarantee compatibility. Confirm the receiver model, frequency and programming procedure before ordering. For receiver products, wiring, power input and supported transmitter memory must also match the control system.
In Dubai, Sharjah, Abu Dhabi and across the UAE, the BFT MITTO B RCB Remote Control may be used as part of an existing gate, barrier or garage-door automation installation after compatibility checks. Programming may require access to a receiver learning button, control-board menu, authorized master transmitter, or professional technician; the procedure depends on the specific installed equipment. This listing focuses on the BFT MITTO B RCB product rather than promising universal compatibility.
BFT MITTO B RCB Features
- Model-specific BFT remote transmitter for supported automation systems
- Intended for wireless entrance access when paired with a compatible receiver or control board
- Suitable for adding or replacing an access device subject to compatibility and programming
- Applicable to residential or commercial vehicle access systems where supported
- Compact automation accessory intended for everyday operational convenience
BFT MITTO B RCB Technical Specifications
- Product: BFT MITTO B RCB Remote Control
- Model / reference: BFT MITTO B RCB
- Brand: BFT
- Product category: Gate Remote Control
- Compatibility: confirm the precise existing receiver/control board and coding protocol
- Radio frequency: verify the exact variant against the product label or manufacturer datasheet
- Programming: procedure depends on the receiver / automation controller
- Exported product details: frequency 433.92 MHz
- Exported product details: channels 2
- Exported product details: Rolling Code
- Exported product details: Power Supply: 12V
BFT MITTO B RCB Kit Includes
- 1 × BFT MITTO B RCB Remote Control (quantity and accessories subject to the actual SKU/package)
BFT MITTO B RCB Applications
- Villas and private residential automatic gates
- Apartment and residential-complex access entrances
- Commercial building and office parking entries
- Warehouse and industrial site access where receiver compatibility is confirmed
- Garage door, sliding gate, swing gate or barrier automation only if supported by the installed radio system
Why Choose BFT MITTO B RCB?
- Dedicated BFT MITTO B RCB model identification helps order the intended replacement or additional access unit
- BFT range alignment supports clear receiver and transmitter compatibility checks
- Practical option for controlled property access when correctly paired and programmed
- Appropriate for UAE residential and commercial maintenance and upgrade projects
BFT MITTO B RCB Remote Control Supply & Programming Services in UAE
We supply BFT gate remote controls and related automation accessories across Dubai, Sharjah, Abu Dhabi, Ajman, Al Ain, Ras Al Khaimah, Fujairah and Umm Al Quwain. Our team can help identify the required BFT MITTO B RCB variant, check transmitter/receiver compatibility, and arrange programming, setup or receiver replacement where supported. Programming and site-service charges depend on the equipment and location; contact us for availability and a quotation.
BFT MITTO B RCB FAQs
Will the BFT MITTO B RCB work with any gate motor?
No. The BFT MITTO B RCB must match the installed receiver, operating frequency and coding system. Confirm compatibility before purchase.
Can this model replace an older remote?
Possibly, provided the receiver supports the BFT MITTO B RCB and the required programming method. Check the original transmitter and receiver reference.
Can this remote be programmed on site in the UAE?
Yes, where the receiver allows enrolment and access permissions are available. Contact us with the receiver and current remote details.
What is supplied with this product?
The listed unit or set is supplied according to the actual selected SKU. Additional receivers, batteries, mounting accessories or installation are not included unless specifically stated in the order.
Why Choose Us?
We focus on automatic gate motors, garage door systems, parking barriers, access-control accessories and remote-control programming throughout the UAE. Our team can assist with product identification, compatibility advice, supply and professional programming or installation services for supported systems. We aim to recommend the correct part for your existing automation setup rather than a remote selected by appearance alone.
BFT MITTO B RCB Original Product Information
BFT MITTO B RCB Remote Control – Italian-engineered BFT radio technology for Automatic Gate Access
The BFT MITTO B RCB is a remote control transmitter designed for compatible BFT access systems. It can provide convenient wireless operation for automatic sliding gates, swing gates, garage doors and parking barriers where receiver compatibility is confirmed. Suitable for replacement or additional-user requirements across the United Arab Emirates. Key technical details include channels 2, frequency 433.92 MHz, coding Rolling Code. For reliable operation, the transmitter frequency, coding system and receiver family should always match the installed automation.
BFT MITTO B RCB Features
- 2-button / 2-channel transmitter
- 433.92 MHz BFT rolling-code radio system
- Compact key-fob design
- Receiver or supported remote-to-remote programming
- Suitable as an additional or replacement BFT transmitter
BFT MITTO B RCB Technical Specifications
- Brand: BFT
- Model: MITTO B RCB / MITTO2
- Channels: 2
- Frequency: 433.92 MHz
- Coding: Rolling Code
- Power Supply: 12V 23A alkaline battery
- Dimensions: Approx. 60 × 40 × 15 mm
- Weight: Approx. 22 g
- Typical Open-Field Range: Approx. 50–100 m depending on receiver and site
BFT MITTO B RCB Kit Includes
- 1 × BFT MITTO B RCB remote control
- 1 × 12V 23A battery (installed/supplied depending on package)
BFT MITTO B RCB Applications
- Automatic sliding gates
- Automatic swing gates
- Garage door openers
- Parking gate barriers
- Residential and commercial access automation
BFT MITTO B RCB Compatibility & Programming
Compatibility: Use only with a compatible receiver that matches the required frequency and radio coding. Matching frequency alone does not guarantee compatibility.
Programming: Program through a compatible BFT receiver. Remote-to-remote memorisation may be available where the receiver configuration permits it.
Why Choose BFT MITTO B RCB?
- Model-specific solution for compatible BFT radio systems
- Useful as a replacement or additional access-control component when compatibility is confirmed
- Designed for convenient wireless gate, garage or barrier operation
- Technical specifications and programming requirements researched for easier product selection
Why Choose Sliding Gate Motor UAE?
- Gate automation products and accessories supplied across the United Arab Emirates
- Compatibility assistance for remote controls, receivers and gate control boards
- Programming and technical support available for compatible automation systems
- Products for residential, commercial and industrial access applications
BFT MITTO B RCB FAQs
What frequency does BFT MITTO B RCB use?
BFT MITTO B RCB operates on 433.92 MHz. It uses Rolling Code coding.
Is BFT MITTO B RCB compatible with my gate motor?
Use only with a compatible receiver that matches the required frequency and radio coding. Matching frequency alone does not guarantee compatibility.
How do I program BFT MITTO B RCB?
Program through a compatible BFT receiver. Remote-to-remote memorisation may be available where the receiver configuration permits it.
What battery does BFT MITTO B RCB use?
Battery type depends on the exact transmitter version. Check the battery fitted to the existing remote or the manufacturer specification.
Can BFT MITTO B RCB be used as an additional remote?
Yes, provided the installed receiver has available memory and the transmitter frequency/coding are compatible. It must be programmed using the correct receiver procedure.
