BFT KUSTOS BT A25 – Italian 24V Intensive-Use Swing Gate Automation with D-Track
The BFT KUSTOS BT A25 is a premium Italian 24V electromechanical swing gate operator developed for precise, intensive-use automation. Magnetic limit switches, D-Track torque management and THALIA control compatibility make it well suited to frequently used villa, compound and commercial swing gates.
Designed for professional automatic swing gate projects in the United Arab Emirates, BFT KUSTOS BT A25 can be integrated with a correctly matched control board, remote controls, safety photocells, warning light and access-control accessories. Final motor selection should always consider the physical gate, hinge condition, pillar geometry, wind exposure, opening angle and expected operating frequency rather than relying on gate weight alone.
BFT KUSTOS BT A25 Features
- Suitable for gate leaves up to 2.5 m and published capacities up to 400 kg in suitable geometry
- 24V DC motor with approximately 40W power consumption
- 295 mm useful rod stroke and opening angle up to approximately 118°
- Approx. 13-second movement under stated conditions
- Magnetic limit switches for accurate travel management
- BFT D-Track obstacle/torque management
- Slowdown support for controlled end-of-travel movement
- Mechanical locking and personal-key manual release
- Intensive-use design
- IP44 protection and -20°C to +55°C stated operating range
- Designed for THALIA control unit and BFT U-Link compatible ecosystem
BFT KUSTOS BT A25 Technical Specifications
| Model | BFT KUSTOS BT A25 |
| Product Reference | P935099 00002 |
| Motor Voltage | 24V DC |
| Board Supply | 230V AC |
| Power Consumption | 40W |
| Maximum Gate Leaf Length | Up to 2.5 m |
| Published Gate Capacity | Up to 400 kg* |
| Useful Rod Stroke | 295 mm |
| Maximum Opening Angle | Approx. 118° |
| Opening Time | Approx. 13 seconds |
| Limit Switches | Magnetic |
| Torque / Obstacle Management | D-Track |
| Slowdown | Yes |
| Locking | Mechanical |
| Frequency of Use | Intensive |
| Protection Rating | IP44 |
| Operating Temperature | -20°C to +55°C |
| Recommended Control Unit | BFT THALIA |
| Country of Origin | Italy |
BFT KUSTOS BT A25 Kit Includes
The following package contents are based on researched complete-kit configurations for this model or the corresponding manufacturer kit:
- 2 x BFT KUSTOS BT A25 24V swing gate motors
- 1 x BFT THALIA control panel
- 1 x Pair of self-aligning safety photocells
- 1 x Flashing light with antenna
- 2 x BFT MITTO2 remote controls
- 1 x Push button
- 2 x Fixing bracket sets
Kit contents may vary by market, stock package or manufacturer revision. Please confirm the exact supplied items before ordering, especially control boards, receiver models, remote-control types, foundation boxes or electric locks.
BFT KUSTOS BT A25 Applications
- High-use villa gates
- Residential compounds
- Commercial entrances
- Private estate gates
- Automatic gates requiring 24V control, D-Track and advanced safety integration
BFT KUSTOS BT A25 Supply & Installation Services
For reliable operation, the gate should move freely by hand before automation is installed. The hinges, stops, posts or pillars and mounting points should be structurally sound. Correct motor geometry is particularly important on swing gates because bracket position directly affects actuator travel, leverage, opening angle and the load placed on the motor.
A professional installation normally includes motor and bracket positioning, control-panel wiring, limit or travel setup, remote-control programming, safety-photocell alignment, automatic-closing configuration where required, force or torque adjustment, manual-release testing and final commissioning. Electrical installation should follow the manufacturer's instructions and applicable site requirements.
BFT KUSTOS BT A25 Compatible Accessories & Access Control
Depending on the selected BFT control board and product revision, BFT KUSTOS BT A25 can be combined with compatible accessories such as:
- Manufacturer-compatible remote controls and radio receivers
- Infrared safety photocells and other supported safety devices
- Flashing / warning lights
- Push buttons and key switches
- GSM gate openers and dry-contact mobile access controllers
- Keypads, RFID readers, intercom systems and access-control relays
- Electric locks where required by gate length, wind load or manufacturer guidance
- Battery backup or low-voltage accessories where supported by the exact 24V control system
Accessory voltage, input type and radio compatibility should be checked before connection. Do not assume that an accessory from the same brand is compatible with every controller generation.
Why Choose BFT KUSTOS BT A25?
BFT KUSTOS BT A25 is suitable for customers looking for a model-specific BFT swing gate automation solution with documented technical parameters, established control electronics and the ability to integrate safety and access-control equipment. Its selection should be based on the actual gate dimensions and usage profile so the motor operates with an appropriate mechanical margin rather than continuously at its maximum limit.
Why Choose Us – Sliding Gate Motor UAE
- Technical assistance to match the motor with gate leaf length, weight, hinge geometry and expected usage
- Support identifying compatible control boards, remotes, photocells and access-control accessories
- Professional installation, programming and testing services subject to project location and availability
- Gate automation products and spare-part support for established international manufacturers
- Delivery support across the United Arab Emirates
- After-sales assistance for compatible automation equipment and system setup
BFT KUSTOS BT A25 FAQs
What gate is BFT KUSTOS BT A25 suitable for?
BFT KUSTOS BT A25 should be selected according to gate leaf length (Up to 2.5 m), gate weight/capacity (Up to 400 kg*), hinge position, opening angle, wind loading, gate construction and expected daily usage. Published capacities assume a correctly aligned, freely moving gate and suitable installation geometry.
What power supply and control system does BFT KUSTOS BT A25 use?
The researched configuration uses 24V DC. The referenced control platform is BFT THALIA. The exact board, transformer and accessory wiring should always be confirmed against the supplied product revision before installation.
What is included with the BFT KUSTOS BT A25 kit?
Researched complete-kit configurations commonly include 2 x BFT KUSTOS BT A25 24V swing gate motors, 1 x BFT THALIA control panel, 1 x Pair of self-aligning safety photocells, 1 x Flashing light with antenna. Exact kit contents can vary by market, distributor and product revision, so the final supplied package should be confirmed on the quotation or order.
Can BFT KUSTOS BT A25 be opened manually during a power failure?
Yes, the researched BFT automation configuration provides a manual or emergency release arrangement. The release method differs by operator type, so the installer should demonstrate the correct procedure after commissioning.
Can BFT KUSTOS BT A25 work with photocells, remotes, GSM or access control?
Yes, when connected through the compatible BFT control system, the operator can be integrated with supported remote receivers, safety photocells, flashing lights, push buttons and access-control devices such as GSM controllers, keypads or intercom relays. Compatibility must be checked before wiring.
Is professional installation available for BFT KUSTOS BT A25 in the United Arab Emirates?
Professional installation, setup, programming and testing can be arranged subject to product availability, project requirements and location. Correct bracket geometry, gate condition, safety-device positioning and final force/travel settings are important for reliable operation.
Need Help with BFT KUSTOS BT A25?
For product selection, provide the gate leaf length, approximate gate weight, number of leaves, pillar and hinge dimensions, required opening angle, expected daily usage and clear photographs of the entrance. This information helps confirm whether BFT KUSTOS BT A25 is suitable and which control, safety and access-control accessories should be included.
