BFT PHOBOS AC A25 Swing Gate Motor UAE

100% Genuine Brand Product
Product Warranty
UAE Wide Delivery
Technical Support
  • Brand: BFT
  • Product Code: BFT PHOBOS AC A25
  • Availability: In Stock
Price
2,000.00 AED
In Stock

Looking for Professional Installation Services?

Our expert and certified team can provide professional installation, setup, programming and testing services for all products across the UAE. Contact us to confirm installation availability and service charges for your location or project.

Order on WhatsApp
Secure ShoppingProtected checkout
After SalesSupport available
Genuine ProductsOriginal brands
UAE DeliveryAcross the Emirates

BFT PHOBOS AC A25 Swing Gate Motor UAE

BFT PHOBOS AC A25 – Italian Engineered 230V Swing Gate Operator for Gates up to 400 KG

The BFT PHOBOS AC A25 is an Italian-made 230V electromechanical linear swing gate operator for residential and compatible commercial entrances. Designed for leaves up to 2.5 metres and published capacities up to 400 kg, it combines a 350 mm stroke with electronic clutch impact reaction, slowdown and mechanical locking.

Designed for professional automatic swing gate projects in the United Arab Emirates, BFT PHOBOS AC A25 can be integrated with a correctly matched control board, remote controls, safety photocells, warning light and access-control accessories. Final motor selection should always consider the physical gate, hinge condition, pillar geometry, wind exposure, opening angle and expected operating frequency rather than relying on gate weight alone.

BFT PHOBOS AC A25 Features

  • Designed for gate leaves up to 2.5 m
  • Published gate capacity up to 400 kg in suitable geometry
  • 230V AC operation with 210W power consumption
  • 350 mm useful rod stroke and opening angle up to 120°
  • Approx. 14-second operating time
  • Electronic clutch for impact reaction management
  • Slowdown function for smoother end-of-travel movement
  • Mechanical locking with personal-key manual release
  • Semi-intensive use for residential and compatible commercial entrances
  • IPX4 protection and operating range approximately -20°C to +55°C
  • Compatible with RIGEL 6 / ALENA SW2 control units

BFT PHOBOS AC A25 Technical Specifications

ModelBFT PHOBOS AC A25
Product CodeP935098 00002
Motor Power Supply230V AC
Power Consumption210W
Maximum Gate WeightUp to 400 kg*
Maximum Gate Leaf LengthUp to 2.5 m
Useful Rod Stroke350 mm
Maximum Opening AngleUp to 120°
Cycle TimeApprox. 14 seconds
Limit ManagementWork time
Control UnitRIGEL 6 / ALENA SW2
SlowdownYes
Locking SystemMechanical
Impact ReactionElectronic clutch
Frequency of UseSemi-intensive
Protection RatingIPX4
Operating Temperature-20°C to +55°C
Country of OriginItaly

BFT PHOBOS AC A25 Kit Includes

The following package contents are based on researched complete-kit configurations for this model or the corresponding manufacturer kit:

  • 2 x BFT PHOBOS AC A25 swing gate motors
  • 1 x BFT RIGEL 6 control panel
  • 1 x Pair of adjustable safety photocells
  • 1 x Flashing light with antenna
  • 2 x BFT MITTO2 B RCB remote controls
  • 1 x Push button
  • 2 x Fixing bracket sets

Kit contents may vary by market, stock package or manufacturer revision. Please confirm the exact supplied items before ordering, especially control boards, receiver models, remote-control types, foundation boxes or electric locks.

BFT PHOBOS AC A25 Applications

  • Villa swing gates
  • Residential entrances
  • Private compounds
  • Commercial gates within duty limits
  • Double swing gate automation with remote and safety accessories

BFT PHOBOS AC A25 Supply & Installation Services

For reliable operation, the gate should move freely by hand before automation is installed. The hinges, stops, posts or pillars and mounting points should be structurally sound. Correct motor geometry is particularly important on swing gates because bracket position directly affects actuator travel, leverage, opening angle and the load placed on the motor.

A professional installation normally includes motor and bracket positioning, control-panel wiring, limit or travel setup, remote-control programming, safety-photocell alignment, automatic-closing configuration where required, force or torque adjustment, manual-release testing and final commissioning. Electrical installation should follow the manufacturer's instructions and applicable site requirements.

BFT PHOBOS AC A25 Compatible Accessories & Access Control

Depending on the selected BFT control board and product revision, BFT PHOBOS AC A25 can be combined with compatible accessories such as:

  • Manufacturer-compatible remote controls and radio receivers
  • Infrared safety photocells and other supported safety devices
  • Flashing / warning lights
  • Push buttons and key switches
  • GSM gate openers and dry-contact mobile access controllers
  • Keypads, RFID readers, intercom systems and access-control relays
  • Electric locks where required by gate length, wind load or manufacturer guidance
  • Battery backup or low-voltage accessories where supported by the exact 24V control system

Accessory voltage, input type and radio compatibility should be checked before connection. Do not assume that an accessory from the same brand is compatible with every controller generation.

Why Choose BFT PHOBOS AC A25?

BFT PHOBOS AC A25 is suitable for customers looking for a model-specific BFT swing gate automation solution with documented technical parameters, established control electronics and the ability to integrate safety and access-control equipment. Its selection should be based on the actual gate dimensions and usage profile so the motor operates with an appropriate mechanical margin rather than continuously at its maximum limit.

Why Choose Us – Sliding Gate Motor UAE

  • Technical assistance to match the motor with gate leaf length, weight, hinge geometry and expected usage
  • Support identifying compatible control boards, remotes, photocells and access-control accessories
  • Professional installation, programming and testing services subject to project location and availability
  • Gate automation products and spare-part support for established international manufacturers
  • Delivery support across the United Arab Emirates
  • After-sales assistance for compatible automation equipment and system setup

BFT PHOBOS AC A25 FAQs

What gate is BFT PHOBOS AC A25 suitable for?

BFT PHOBOS AC A25 should be selected according to gate leaf length (Up to 2.5 m), gate weight/capacity (Up to 400 kg*), hinge position, opening angle, wind loading, gate construction and expected daily usage. Published capacities assume a correctly aligned, freely moving gate and suitable installation geometry.

What power supply and control system does BFT PHOBOS AC A25 use?

The researched configuration uses 230V AC. The referenced control platform is RIGEL 6 / ALENA SW2. The exact board, transformer and accessory wiring should always be confirmed against the supplied product revision before installation.

What is included with the BFT PHOBOS AC A25 kit?

Researched complete-kit configurations commonly include 2 x BFT PHOBOS AC A25 swing gate motors, 1 x BFT RIGEL 6 control panel, 1 x Pair of adjustable safety photocells, 1 x Flashing light with antenna. Exact kit contents can vary by market, distributor and product revision, so the final supplied package should be confirmed on the quotation or order.

Can BFT PHOBOS AC A25 be opened manually during a power failure?

Yes, the researched BFT automation configuration provides a manual or emergency release arrangement. The release method differs by operator type, so the installer should demonstrate the correct procedure after commissioning.

Can BFT PHOBOS AC A25 work with photocells, remotes, GSM or access control?

Yes, when connected through the compatible BFT control system, the operator can be integrated with supported remote receivers, safety photocells, flashing lights, push buttons and access-control devices such as GSM controllers, keypads or intercom relays. Compatibility must be checked before wiring.

Is professional installation available for BFT PHOBOS AC A25 in the United Arab Emirates?

Professional installation, setup, programming and testing can be arranged subject to product availability, project requirements and location. Correct bracket geometry, gate condition, safety-device positioning and final force/travel settings are important for reliable operation.

Need Help with BFT PHOBOS AC A25?

For product selection, provide the gate leaf length, approximate gate weight, number of leaves, pillar and hinge dimensions, required opening angle, expected daily usage and clear photographs of the entrance. This information helps confirm whether BFT PHOBOS AC A25 is suitable and which control, safety and access-control accessories should be included.

Compatibility references

Compatible & Related Models Mentioned for This Product

These links are created only from model references already stated in this product description. Confirm the exact model revision, voltage and receiver/control-board version before ordering.