BFT PHOBOS AC A50 – Italian Engineered 230V Long-Leaf Swing Gate Operator up to 5 Metres
The BFT PHOBOS AC A50 is a 230V Italian electromechanical swing gate operator for long residential, commercial and architectural gate leaves. With a 460 mm useful stroke and published support for leaves up to 5 metres, it is intended for professionally sized installations requiring a robust conventional AC actuator.
Designed for professional automatic swing gate projects in the United Arab Emirates, BFT PHOBOS AC A50 can be integrated with a correctly matched control board, remote controls, safety photocells, warning light and access-control accessories. Final motor selection should always consider the physical gate, hinge condition, pillar geometry, wind exposure, opening angle and expected operating frequency rather than relying on gate weight alone.
BFT PHOBOS AC A50 Features
- Designed for gate leaves up to 5 m within BFT sizing limits
- Published gate capacity up to 500 kg in suitable configuration
- 230V AC motor with 210W power consumption
- 460 mm useful rod stroke and up to 129° opening angle
- Approx. 18-second operating time
- Electronic clutch impact management and slowdown
- Mechanical locking with personal-key manual release
- Semi-intensive duty for residential and compatible commercial operation
- IPX4 protection and -20°C to +55°C operating range
- Compatible with RIGEL 6 / ALENA SW2 controls
BFT PHOBOS AC A50 Technical Specifications
| Model | BFT PHOBOS AC A50 |
| Product Code | P935097 00002 |
| Motor Power Supply | 230V AC |
| Power Consumption | 210W |
| Maximum Gate Weight | Up to 500 kg* |
| Maximum Gate Leaf Length | Up to 5 m |
| Useful Rod Stroke | 460 mm |
| Maximum Opening Angle | Up to 129° |
| Opening Time | Approx. 18 seconds |
| Control Unit | RIGEL 6 / ALENA SW2 |
| Slowdown | Yes |
| Locking System | Mechanical |
| Impact Reaction | Electronic clutch |
| Frequency of Use | Semi-intensive |
| Protection Rating | IPX4 |
| Operating Temperature | -20°C to +55°C |
| Country of Origin | Italy |
BFT PHOBOS AC A50 Kit Includes
The following package contents are based on researched complete-kit configurations for this model or the corresponding manufacturer kit:
- 2 x BFT PHOBOS AC A50 swing gate motors
- 1 x Compatible BFT RIGEL 6 / ALENA control panel
- 1 x Pair of safety photocells
- 1 x Flashing warning light with antenna
- 2 x BFT MITTO remote controls
- 1 x Push button
- 2 x Mounting bracket sets
Kit contents may vary by market, stock package or manufacturer revision. Please confirm the exact supplied items before ordering, especially control boards, receiver models, remote-control types, foundation boxes or electric locks.
BFT PHOBOS AC A50 Applications
- Large villa swing gates
- Private compounds and estates
- Commercial entrances
- Long-leaf double swing gates
- Professional 230V gate automation systems
BFT PHOBOS AC A50 Supply & Installation Services
For reliable operation, the gate should move freely by hand before automation is installed. The hinges, stops, posts or pillars and mounting points should be structurally sound. Correct motor geometry is particularly important on swing gates because bracket position directly affects actuator travel, leverage, opening angle and the load placed on the motor.
A professional installation normally includes motor and bracket positioning, control-panel wiring, limit or travel setup, remote-control programming, safety-photocell alignment, automatic-closing configuration where required, force or torque adjustment, manual-release testing and final commissioning. Electrical installation should follow the manufacturer's instructions and applicable site requirements.
BFT PHOBOS AC A50 Compatible Accessories & Access Control
Depending on the selected BFT control board and product revision, BFT PHOBOS AC A50 can be combined with compatible accessories such as:
- Manufacturer-compatible remote controls and radio receivers
- Infrared safety photocells and other supported safety devices
- Flashing / warning lights
- Push buttons and key switches
- GSM gate openers and dry-contact mobile access controllers
- Keypads, RFID readers, intercom systems and access-control relays
- Electric locks where required by gate length, wind load or manufacturer guidance
- Battery backup or low-voltage accessories where supported by the exact 24V control system
Accessory voltage, input type and radio compatibility should be checked before connection. Do not assume that an accessory from the same brand is compatible with every controller generation.
Why Choose BFT PHOBOS AC A50?
BFT PHOBOS AC A50 is suitable for customers looking for a model-specific BFT swing gate automation solution with documented technical parameters, established control electronics and the ability to integrate safety and access-control equipment. Its selection should be based on the actual gate dimensions and usage profile so the motor operates with an appropriate mechanical margin rather than continuously at its maximum limit.
Why Choose Us – Sliding Gate Motor UAE
- Technical assistance to match the motor with gate leaf length, weight, hinge geometry and expected usage
- Support identifying compatible control boards, remotes, photocells and access-control accessories
- Professional installation, programming and testing services subject to project location and availability
- Gate automation products and spare-part support for established international manufacturers
- Delivery support across the United Arab Emirates
- After-sales assistance for compatible automation equipment and system setup
BFT PHOBOS AC A50 FAQs
What gate is BFT PHOBOS AC A50 suitable for?
BFT PHOBOS AC A50 should be selected according to gate leaf length (Up to 5 m), gate weight/capacity (Up to 500 kg*), hinge position, opening angle, wind loading, gate construction and expected daily usage. Published capacities assume a correctly aligned, freely moving gate and suitable installation geometry.
What power supply and control system does BFT PHOBOS AC A50 use?
The researched configuration uses 230V AC. The referenced control platform is RIGEL 6 / ALENA SW2. The exact board, transformer and accessory wiring should always be confirmed against the supplied product revision before installation.
What is included with the BFT PHOBOS AC A50 kit?
Researched complete-kit configurations commonly include 2 x BFT PHOBOS AC A50 swing gate motors, 1 x Compatible BFT RIGEL 6 / ALENA control panel, 1 x Pair of safety photocells, 1 x Flashing warning light with antenna. Exact kit contents can vary by market, distributor and product revision, so the final supplied package should be confirmed on the quotation or order.
Can BFT PHOBOS AC A50 be opened manually during a power failure?
Yes, the researched BFT automation configuration provides a manual or emergency release arrangement. The release method differs by operator type, so the installer should demonstrate the correct procedure after commissioning.
Can BFT PHOBOS AC A50 work with photocells, remotes, GSM or access control?
Yes, when connected through the compatible BFT control system, the operator can be integrated with supported remote receivers, safety photocells, flashing lights, push buttons and access-control devices such as GSM controllers, keypads or intercom relays. Compatibility must be checked before wiring.
Is professional installation available for BFT PHOBOS AC A50 in the United Arab Emirates?
Professional installation, setup, programming and testing can be arranged subject to product availability, project requirements and location. Correct bracket geometry, gate condition, safety-device positioning and final force/travel settings are important for reliable operation.
Need Help with BFT PHOBOS AC A50?
For product selection, provide the gate leaf length, approximate gate weight, number of leaves, pillar and hinge dimensions, required opening angle, expected daily usage and clear photographs of the entrance. This information helps confirm whether BFT PHOBOS AC A50 is suitable and which control, safety and access-control accessories should be included.
