The BENINCA JM4 ESA is a 24 V DC garage door operator designed for installations that need regular powered access. Its 1200 N thrust rating and stated maximum door area of 22 m² provide a starting point for selecting an opener for a residential garage or suitable shared entrance. The door must be mechanically sound and correctly balanced before automation is added.
Movement is managed by an integrated encoder and electronic travel control. This lets the controller monitor the door during opening and closing rather than relying only on timed motor operation. Obstacle detection is part of the system, but correct force adjustment and safety-device testing are still essential during commissioning.
The JM4 ESA is the higher-thrust option for compatible larger sectional doors. Its control display and courtesy lighting assist setup and daily use, while a compatible optional battery arrangement can support access during a mains interruption. The available space and selected rail must be checked before deciding on the complete package.
Key Features
- Integrated encoder and electronic limit management.
- Built-in controller and radio receiver.
- 1200 N thrust for a matched, balanced door.
- Obstacle monitoring through the control electronics.
- Compatible optional battery backup, display and courtesy lighting.
Technical Specifications
- Model: BENINCA JM4 ESA.
- Power supply: 230 V AC, 50–60 Hz; motor: 24 V DC.
- Maximum absorbed current: 1.5 A.
- Thrust: 1200 N.
- Maximum door area: 22 m².
- Opening speed: 8.9 m/min.
- Protection: IP40; operating temperature: −20°C to +50°C.
- Motor weight: 6.6 kg.
- Duty classification: intensive use, subject to installation conditions.
Garage Compatibility and Installation
For a garage in Dubai, Sharjah, Abu Dhabi or elsewhere in the UAE, begin with the actual door measurements and operating pattern. Check headroom, rail travel, mounting points and the condition of rollers, hinges and counterbalance hardware. A powered opener should be fitted to a door that already moves freely and remains correctly balanced.
During commissioning, the installer should set opening and closing travel, test force response and any connected safety sensors, and demonstrate the manual release. Confirm the supplied rail, remote controls and optional accessories before ordering so the installation matches the access requirements of the property.
Frequently Asked Questions
How do I choose between JM3 and JM4 ESA?
Compare the door area, force requirement and operating pattern. JM3 is listed at 600 N and 11 m²; JM4 ESA at 1200 N and 22 m². Final selection also depends on the door mechanism and rail.
Does a motor replacement fix a stiff garage door?
A binding or poorly balanced door should be repaired first. The opener is intended to move a serviceable door, not compensate for damaged rollers, tracks or counterbalance components.
Can I keep existing Beninca accessories?
Provide the accessory model numbers for checking. Receiver protocol, safety-device wiring and rail compatibility need to match the selected controller and operator.
