V2 PHOENIX Remote Control – Detailed Product Introduction
The V2 PHOENIX Remote Control is a gate remote control designed for handheld wireless control for compatible automatic entrance systems in the United Arab Emirates. The V2 PHOENIX model belongs to the V2 automation range and is intended for users who need dependable access to an existing supported receiver or automation control board. It can serve villas, residential compounds, commercial buildings, managed parking entrances and other facilities where the installed receiver supports this exact model.
Choosing the correct V2 PHOENIX is especially important when replacing a lost transmitter, adding a user, or maintaining multiple access points. Remote controls that look alike may use different radio frequencies, coding protocols, or receiver generations, so identical housing or matching brand names do not guarantee compatibility. Confirm the receiver model, frequency and programming procedure before ordering. For receiver products, wiring, power input and supported transmitter memory must also match the control system.
In Dubai, Sharjah, Abu Dhabi and across the UAE, the V2 PHOENIX Remote Control may be used as part of an existing gate, barrier or garage-door automation installation after compatibility checks. Programming may require access to a receiver learning button, control-board menu, authorized master transmitter, or professional technician; the procedure depends on the specific installed equipment. This listing focuses on the V2 PHOENIX product rather than promising universal compatibility.
V2 PHOENIX Features
- Model-specific V2 remote transmitter for supported automation systems
- Intended for wireless entrance access when paired with a compatible receiver or control board
- Suitable for adding or replacing an access device subject to compatibility and programming
- Applicable to residential or commercial vehicle access systems where supported
- Compact automation accessory intended for everyday operational convenience
V2 PHOENIX Technical Specifications
- Product: V2 PHOENIX Remote Control
- Model / reference: V2 PHOENIX
- Brand: V2
- Product category: Gate Remote Control
- Compatibility: confirm the precise existing receiver/control board and coding protocol
- Radio frequency: verify the exact variant against the product label or manufacturer datasheet
- Programming: procedure depends on the receiver / automation controller
- Exported product details: frequency 433.92 MHz
- Exported product details: channels 2
- Exported product details: Rolling Code
- Exported product details: battery 12V
V2 PHOENIX Kit Includes
- 1 × V2 PHOENIX Remote Control (quantity and accessories subject to the actual SKU/package)
V2 PHOENIX Applications
- Villas and private residential automatic gates
- Apartment and residential-complex access entrances
- Commercial building and office parking entries
- Warehouse and industrial site access where receiver compatibility is confirmed
- Garage door, sliding gate, swing gate or barrier automation only if supported by the installed radio system
Why Choose V2 PHOENIX?
- Dedicated V2 PHOENIX model identification helps order the intended replacement or additional access unit
- V2 range alignment supports clear receiver and transmitter compatibility checks
- Practical option for controlled property access when correctly paired and programmed
- Appropriate for UAE residential and commercial maintenance and upgrade projects
V2 PHOENIX Remote Control Supply & Programming Services in UAE
We supply V2 gate remote controls and related automation accessories across Dubai, Sharjah, Abu Dhabi, Ajman, Al Ain, Ras Al Khaimah, Fujairah and Umm Al Quwain. Our team can help identify the required V2 PHOENIX variant, check transmitter/receiver compatibility, and arrange programming, setup or receiver replacement where supported. Programming and site-service charges depend on the equipment and location; contact us for availability and a quotation.
V2 PHOENIX FAQs
Will the V2 PHOENIX work with any gate motor?
No. The V2 PHOENIX must match the installed receiver, operating frequency and coding system. Confirm compatibility before purchase.
Can this model replace an older remote?
Possibly, provided the receiver supports the V2 PHOENIX and the required programming method. Check the original transmitter and receiver reference.
Can this remote be programmed on site in the UAE?
Yes, where the receiver allows enrolment and access permissions are available. Contact us with the receiver and current remote details.
What is supplied with this product?
The listed unit or set is supplied according to the actual selected SKU. Additional receivers, batteries, mounting accessories or installation are not included unless specifically stated in the order.
Why Choose Us?
We focus on automatic gate motors, garage door systems, parking barriers, access-control accessories and remote-control programming throughout the UAE. Our team can assist with product identification, compatibility advice, supply and professional programming or installation services for supported systems. We aim to recommend the correct part for your existing automation setup rather than a remote selected by appearance alone.
V2 PHOENIX Original Product Information
V2 PHOENIX Remote Control – Italian V2 automation engineering for Automatic Gate Access
The V2 PHOENIX is a remote control transmitter designed for compatible V2 access systems. It can provide convenient wireless operation for automatic sliding gates, swing gates, garage doors and parking barriers where receiver compatibility is confirmed. Suitable for replacement or additional-user requirements across the United Arab Emirates. Key technical details include channels 2 or 4 depending on exact variant, frequency 433.92 MHz on listed UAE version, coding Rolling Code / Personal Pass family, battery 12V GP23A on documented PHOENIX family. For reliable operation, the transmitter frequency, coding system and receiver family should always match the installed automation.
V2 PHOENIX Features
- Legacy V2 Personal Pass transmitter
- 433.92 MHz rolling-code operation on common UAE version
- Available historically in 2- and 4-button versions
- Compact black/white housing
- Replaced in current V2 range by PHOX equivalents
V2 PHOENIX Technical Specifications
- Brand: V2
- Model: PHOENIX
- Frequency: 433.92 MHz on listed UAE version
- Channels: 2 or 4 depending on exact variant
- Coding: Rolling Code / Personal Pass family
- Battery: 12V GP23A on documented PHOENIX family
- Modulation: Amplitude / On-Off
- Battery Life: Approx. 6000 transmissions under documented conditions
V2 PHOENIX Kit Includes
- 1 × V2 PHOENIX remote control
- 1 × compatible battery
Compatibility / Version Note: PHOENIX existed in several frequency/button variants. Confirm the transmitter label before programming.
V2 PHOENIX Applications
- Automatic sliding gates
- Automatic swing gates
- Garage door openers
- Parking gate barriers
- Residential and commercial access automation
V2 PHOENIX Compatibility & Programming
Compatibility: Match the exact V2 Personal Pass frequency, serialization/contract and receiver configuration before programming.
Programming: Program according to the compatible V2 Personal Pass receiver. Factory-set and programmable versions use different setup workflows.
Why Choose V2 PHOENIX?
- Model-specific solution for compatible V2 radio systems
- Useful as a replacement or additional access-control component when compatibility is confirmed
- Designed for convenient wireless gate, garage or barrier operation
- Technical specifications and programming requirements researched for easier product selection
Why Choose Sliding Gate Motor UAE?
- Gate automation products and accessories supplied across the United Arab Emirates
- Compatibility assistance for remote controls, receivers and gate control boards
- Programming and technical support available for compatible automation systems
- Products for residential, commercial and industrial access applications
V2 PHOENIX FAQs
What frequency does V2 PHOENIX use?
V2 PHOENIX operates on 433.92 MHz on listed UAE version. It uses Rolling Code / Personal Pass family coding.
Is V2 PHOENIX compatible with my gate motor?
Match the exact V2 Personal Pass frequency, serialization/contract and receiver configuration before programming.
How do I program V2 PHOENIX?
Program according to the compatible V2 Personal Pass receiver. Factory-set and programmable versions use different setup workflows.
What battery does V2 PHOENIX use?
The listed battery is 12V GP23A on documented PHOENIX family.
Can V2 PHOENIX be used as an additional remote?
Yes, provided the installed receiver has available memory and the transmitter frequency/coding are compatible. It must be programmed using the correct receiver procedure.
