V2 LUMOS Flashing Light in UAE
V2 LUMOS – Italian V2 multi-voltage LED warning-light technology with built-in antenna
V2 LUMOS is a professional flashing, warning and blinker light for compatible automatic gate, barrier, garage-door or access-automation systems. It provides a clear visual indication while the connected automation is opening, closing or otherwise operating, helping drivers, pedestrians and property users recognise that automated equipment is in motion.
Built around Italian gate automation engineering, this model is suitable for professional automation projects in the United Arab Emirates. The light should be matched to the exact control-board output voltage, flashing logic and wiring requirements before installation. Flashing lights improve visual awareness but should be used together with the correct photocells, safety devices and mechanical safeguards required by the gate system.
V2 LUMOS Flashing Light Features
- Maintenance-free LED signalling
- Wide multi-voltage compatibility
- Automatic built-in intermittence circuit
- Built-in antenna
- Flat-surface or wall mounting using the supplied bracket
V2 LUMOS Flashing Light Technical Specifications
- Model: LUMOS-M
- Code: 14C003
- Power Supply: 24–300 V DC / 24–230 V AC, 50 Hz
- Operating Temperature: -20°C to +60°C
- Protection Rating: IP54
- Dimensions: 136 × 82 × 35 mm
- Built-In Antenna: Yes
Specification / Compatibility Note: Its multi-voltage design simplifies replacement, but the selected control-board output and wiring must still be checked.
V2 LUMOS Flashing Light Applications
- V2 sliding gate motors
- V2 swing gate motors
- Automatic access systems
- Residential gates
- Commercial and industrial entrances
V2 LUMOS Flashing Light Compatibility, Installation & Safety
Before installing the V2 LUMOS, confirm the control-board flashing-light output, AC/DC supply, required flashing behaviour, mounting position and any antenna connection. Mount the warning light where it is clearly visible from the vehicle and pedestrian approach without interfering with gate movement. After wiring, test the complete opening and closing cycle and confirm the light operates exactly as intended.
Why Choose V2 LUMOS?
- Model-specific warning-light solution for V2 LUMOS
- Clear visual signalling during automatic gate or barrier movement
- Suitable for replacement, maintenance and new automation projects
- Technical compatibility can be checked before installation
- Supports professional residential, commercial and industrial access automation
Why Choose Sliding Gate Motor UAE?
- Specialist automatic gate, barrier, garage and access-control product range
- Compatibility guidance using the motor, control-board and accessory model
- Professional installation, wiring, programming and testing support
- Replacement control boards, remotes, photocells and automation accessories available
- Delivery and technical support across the United Arab Emirates
Frequently Asked Questions About V2 LUMOS
What is the V2 LUMOS used for?
The V2 LUMOS provides a visible warning while a compatible automatic gate, barrier or access automation system is operating.
What power supply does the V2 LUMOS use?
The verified supply information for this model or product family is 24–300 V DC / 24–230 V AC, 50 Hz. Always confirm the product label and control-board output before wiring.
Can the V2 LUMOS be used with sliding gates, swing gates or barriers?
Yes, where the control board is electrically and functionally compatible. Compatibility should be confirmed by the automation model and output specification rather than by gate type alone.
Does a flashing light replace gate safety sensors?
No. A warning light provides visual signalling only. It does not replace photocells, safety edges, obstacle detection or other safety devices required for the installation.
Is installation support available in the United Arab Emirates?
Yes. Professional compatibility checking, installation, wiring and operational testing can be arranged for suitable automation systems across the United Arab Emirates.
Need Help with V2 LUMOS?
Send us the gate or barrier brand, control-board model, existing warning-light details and clear photographs. Our team can help confirm whether the V2 LUMOS is suitable and advise on wiring, replacement and testing in the United Arab Emirates.
