V2 CITY1 EVO – Italian Automation Engineering for Reliable Automatic Gate Automation
V2 CITY1 EVO Gate Motor Control Board in UAE is a model-specific electronic control unit designed for professional automatic gate automation installations. It manages the core automation functions of the connected operator, including opening and closing commands, operating logic, safety inputs, remote-control communication and compatible accessories according to the controller specification.
For customers in the United Arab Emirates, this board is suitable for replacement, repair and maintenance projects where the existing automation system specifically requires the V2 CITY1 EVO controller. Because control boards from the same manufacturer are not automatically interchangeable, the motor model, operating voltage, PCB reference and connected accessories should be checked before installation.
The V2 CITY1 EVO platform reflects Italian Automation Engineering and is intended to restore dependable control to a compatible gate, door or barrier system without unnecessarily replacing a serviceable motor or mechanical operator.
V2 CITY1 EVO Features
- Integrated display or visual programming/diagnostic interface on the documented model
- Radio-receiver integration for compatible remote controls
- Encoder support for accurate movement or obstacle-management functions
- Connections for compatible photocell safety devices
- Opening and/or closing slowdown control for smoother movement
- Pedestrian or partial-opening control
- Automatic learning / autoset functions to simplify commissioning
- Maintenance-cycle or service-warning functions on supported versions
- Diagnostic/status indication to support professional troubleshooting
V2 CITY1 EVO Technical Specifications
- Power supply: 230V AC, 50 Hz
- Motor capacity: up to 2 × 700 W
- Application: two single-phase motors with encoder support
- Programming: 3 buttons and display
- Receiver interface: V2 MR2 modular receiver adaptor
- Self-learning operating time and obstacle detection
- USB/ADI 2.0 / maintenance-cycle functions on documented EVO platform
- Compatibility: One or two 230V single-phase gate motors with encoder support using the V2 CITY1 EVO control platform.
Important: Control-board revisions can differ by motor generation and market version. Always compare the existing PCB code, operator model and wiring configuration before replacing the board.
V2 CITY1 EVO Applications
- Residential automatic gate automation
- Commercial entrances and controlled-access systems
- Professional automation repairs and PCB replacement
- Safety-device and remote-control integration
- Maintenance and upgrade of compatible gate systems
V2 CITY1 EVO Compatibility, Installation & System Integration
The V2 CITY1 EVO should be installed only with a compatible automation system. Before replacement, identify the existing motor or operator, board reference, power supply, limit-switch or encoder arrangement, radio receiver and connected safety devices. One or two 230V single-phase gate motors with encoder support using the V2 CITY1 EVO control platform.
Professional installation may include removal of the failed PCB, verification of mains and motor wiring, connection of photocells and warning devices, receiver or remote-control setup, operating-logic configuration, travel/force adjustment where supported, and final safety testing.
Compatible accessories can include photocells, flashing lights, remote receivers, remote controls, push buttons, key selectors, GSM gate openers and access-control equipment where the controller provides the required inputs and outputs.
Why Choose V2 CITY1 EVO?
- Purpose-matched control solution for compatible V2 automation equipment
- Helps restore an existing automation system without replacing serviceable mechanical components
- Supports professional configuration of motor, safety and command functions according to the model
- Suitable for residential, commercial or specialist automation applications where specified
- Model-specific compatibility can be checked before installation
Why Choose Sliding Gate Motor UAE?
- Specialist supplier of gate motor control boards, PCB boards and automation spare parts
- Compatibility assistance based on motor model, PCB reference and operating voltage
- Professional installation, programming and troubleshooting support
- Support for remote controls, photocells, flashing lights, GSM openers and access-control accessories
- Delivery and technical support across the United Arab Emirates
Frequently Asked Questions About V2 CITY1 EVO
What is the V2 CITY1 EVO used for?
The V2 CITY1 EVO is an electronic control board used to manage compatible automatic gate automation equipment. It coordinates the motor or operator, control commands, safety inputs and supported accessories according to the automation design.
Which motors or systems are compatible with the V2 CITY1 EVO?
One or two 230V single-phase gate motors with encoder support using the V2 CITY1 EVO control platform. Always verify the exact operator model and PCB reference before ordering.
Can the V2 CITY1 EVO replace a damaged control board?
Yes, when the existing automation system specifies the V2 CITY1 EVO or a confirmed compatible revision. The motor voltage, wiring, board code and accessory configuration should be checked before replacement.
Can photocells, remote controls or access-control devices be connected?
Supported accessories depend on the controller version. Compatible photocells, radio receivers, remote controls, flashing lights, push buttons, GSM devices or access-control systems can be integrated where the board provides the required terminals and programming functions.
Do you provide V2 CITY1 EVO installation and programming in the UAE?
Professional control-board replacement, wiring, programming, remote setup and system testing can be arranged depending on the product and project location in the United Arab Emirates.
