SOMMER TWIST XL – German engineering for large gate leaves
A 24V DC operator with published upper limits of 7 m leaf width and 1100 kg. Selection must follow the permitted length-versus-weight relationship and site loading.
SOMMER TWIST XL provides automatic opening and closing for a correctly matched swing gate installation. Choose the configuration according to the individual leaf dimensions, hinge position, opening direction and expected number of daily cycles.
Key Features
- DIN left/right installation
- Up to 110° opening
- IP44 motor and IP65 controller housing
- 20 mm/s maximum thrust speed
Technical Specifications
- Model: TWIST XL
- Article Number: 3280V000
- Brand: SOMMER
- Device Type: Swing Gate Operator
- Maximum Gate Weight: 1100 KG
- Maximum Gate Leaf Width: 7000 mm
- Maximum Gate Inclination: 10%
- Maximum Gate Filling: 100%
- Input Voltage: 220-240V AC
- Rated Frequency: 50-60 Hz
- Motor Voltage: 24V DC
- Maximum Thrust Speed: 20 mm/s
- Maximum Opening Angle: 110°
- Number of Radio Channels: 2
- Motor Duty Cycle: ED 40% S3
- Motor Protection Rating: IP44
- Control Unit Protection Rating: IP65
- Operating Temperature: -25°C to +70°C
- Installation Type: 1-Leaf Swing Gate
- Colour: Anthracite
- Country of Origin: Germany
Published maximum leaf length and weight are selection limits, not a guarantee that both maxima can be used together. Confirm the exact model revision, permitted load curve and mounting dimensions before installation.
Kit Contents and Supply Configuration
The motor or kit configuration must be confirmed when ordering. A complete installation may require a matched control unit, receiver, remotes, safety devices and mounting hardware. These accessories are not assumed to be included unless itemised in the quotation.
Applications and Product Selection
Use SOMMER TWIST XL for hinged vehicle entrances that fall within its specified dimensions and duty rating. Suitable projects may include private villas, residential compounds and compatible commercial entrances. A site assessment should check wind exposure, gate infill, hinge condition and clear movement space.
Installation, Safety and Access Control
The gate should move freely by hand before fitting the drive. The installer must check bracket or foundation geometry, mechanical stops, cable routes and the required electrical supply, then set travel and force parameters according to the supplied manual.
Remote receivers, photocells, warning lights, intercom relays, keypads and GSM or WiFi interfaces must match the selected controller. Test the safety inputs and manual release, where fitted, before handing over the system. Optional smart or backup equipment should be confirmed for the exact controller version.
Frequently Asked Questions
How do I check whether SOMMER TWIST XL fits my gate?
Compare the technical details above with each leaf’s length, weight and mounting geometry. Also provide gate photographs, hinge measurements and expected daily usage so the correct configuration can be confirmed.
What is supplied with this product?
Request confirmation of the motor quantity and required controller, safety devices and accessories. The final supplied items should be listed on the quotation.
Can it connect to remote or smart access control?
Access devices can be added when their electrical output and radio or communication protocol match the selected control unit. Confirm compatibility before purchasing a WiFi, GSM, intercom or keypad accessory.
Is installation available across the UAE?
Professional installation, setup, programming and testing can be arranged subject to location and project requirements. Contact our team for availability and service charges.
Why Choose Sliding Gate Motor UAE?
Get assistance with model selection, compatible accessories and installation requirements, plus delivery support across Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah, Umm Al Quwain and Al Ain. Send the gate dimensions and site photographs to help our team prepare an appropriate supply configuration.
