ROGER R20/510 – Italian engineering with encoder movement control
An irreversible electromechanical kit for leaves up to 3.5 m. Its 230V drive and H70/200AC/BOX control configuration support travel control and slowdown.
ROGER R20/510 provides automatic opening and closing for a correctly matched swing gate installation. Choose the configuration according to the individual leaf dimensions, hinge position, opening direction and expected number of daily cycles.
Key Features
- Encoder feedback
- Opening microswitch
- 520 mm stroke
- 2500 N maximum thrust
Technical Specifications
- Model: R20/510
- Brand: ROGER
- Device Type: Swing Gate Operator
- Maximum Gate Leaf Length: 3.5 Meters
- Power Supply: 230V AC - 50Hz
- Motor Power Supply: 230V AC
- Power Rating: 200W
- Frequency of Use: 40%
- Maximum Thrust: 2500 N
- Operating Temperature: -20°C to +55°C
- Protection Rating: IP44
- Reductor Type: Irreversible
- Manoeuvre Speed: 1.66 cm/s
- Opening Time: 27 Seconds
- Stroke Length: 520 mm
- Motor Thermal Protection: 150°C
- Integrated Condenser: 15 µF
- Limit Switch: Microswitch in Opening
- Encoder: Yes
- Dimensions: 1088.5 × 120 × 165 mm
- Weight: 23.6 KG
- Country of Origin: Italy
Published maximum leaf length and weight are selection limits, not a guarantee that both maxima can be used together. Confirm the exact model revision, permitted load curve and mounting dimensions before installation.
Kit Contents and Supply Configuration
- 2 x R20/500 Electromechanical Swing Gate Operators
- 1 x H70/200AC/BOX Control Unit for 2 Motors with Slow Down
- 1 x H93/RX22A/I Plug-in Receiver 2 Channels 433.92 MHz
- 1 x T80/TX2 Dual Code Transmitter
- 1 x Pair of R90/F2ES External Synchronized Photocells
- 1 x FIFTHY/230 LED Flashing Light
- 1 x R99/C/001 Automatic Opening Signboard
- Fixing Plates Included
The listed package reflects the referenced kit configuration. Confirm the exact motor quantity, controller, receiver and accessories on the quotation before ordering.
Applications and Product Selection
Use ROGER R20/510 for hinged vehicle entrances that fall within its specified dimensions and duty rating. Suitable projects may include private villas, residential compounds and compatible commercial entrances. A site assessment should check wind exposure, gate infill, hinge condition and clear movement space.
Installation, Safety and Access Control
The gate should move freely by hand before fitting the drive. The installer must check bracket or foundation geometry, mechanical stops, cable routes and the required electrical supply, then set travel and force parameters according to the supplied manual.
Remote receivers, photocells, warning lights, intercom relays, keypads and GSM or WiFi interfaces must match the selected controller. Test the safety inputs and manual release, where fitted, before handing over the system. Optional smart or backup equipment should be confirmed for the exact controller version.
Frequently Asked Questions
How do I check whether ROGER R20/510 fits my gate?
Compare the technical details above with each leaf’s length, weight and mounting geometry. Also provide gate photographs, hinge measurements and expected daily usage so the correct configuration can be confirmed.
What is supplied with this product?
See the kit list above. Final contents should be confirmed on the order because controller and accessory packages can vary.
Can it connect to remote or smart access control?
Access devices can be added when their electrical output and radio or communication protocol match the selected control unit. Confirm compatibility before purchasing a WiFi, GSM, intercom or keypad accessory.
Is installation available across the UAE?
Professional installation, setup, programming and testing can be arranged subject to location and project requirements. Contact our team for availability and service charges.
Why Choose Sliding Gate Motor UAE?
Get assistance with model selection, compatible accessories and installation requirements, plus delivery support across Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah, Umm Al Quwain and Al Ain. Send the gate dimensions and site photographs to help our team prepare an appropriate supply configuration.
