ROGER M80/TX44R Remote Control – Detailed Product Introduction
The ROGER M80/TX44R Remote Control is a Italian-engineered gate remote control designed for handheld wireless control for compatible automatic entrance systems in the United Arab Emirates. The ROGER M80/TX44R model belongs to the ROGER automation range and is intended for users who need dependable access to an existing supported receiver or automation control board. It can serve villas, residential compounds, commercial buildings, managed parking entrances and other facilities where the installed receiver supports this exact model.
Choosing the correct ROGER M80/TX44R is especially important when replacing a lost transmitter, adding a user, or maintaining multiple access points. Remote controls that look alike may use different radio frequencies, coding protocols, or receiver generations, so identical housing or matching brand names do not guarantee compatibility. Confirm the receiver model, frequency and programming procedure before ordering. For receiver products, wiring, power input and supported transmitter memory must also match the control system.
In Dubai, Sharjah, Abu Dhabi and across the UAE, the ROGER M80/TX44R Remote Control may be used as part of an existing gate, barrier or garage-door automation installation after compatibility checks. Programming may require access to a receiver learning button, control-board menu, authorized master transmitter, or professional technician; the procedure depends on the specific installed equipment. This listing focuses on the ROGER M80/TX44R product rather than promising universal compatibility.
ROGER M80/TX44R Features
- Model-specific ROGER remote transmitter for supported automation systems
- Intended for wireless entrance access when paired with a compatible receiver or control board
- Suitable for adding or replacing an access device subject to compatibility and programming
- Applicable to residential or commercial vehicle access systems where supported
- Compact automation accessory intended for everyday operational convenience
ROGER M80/TX44R Technical Specifications
- Product: ROGER M80/TX44R Remote Control
- Model / reference: ROGER M80/TX44R
- Brand: ROGER
- Product category: Gate Remote Control
- Compatibility: confirm the precise existing receiver/control board and coding protocol
- Radio frequency: verify the exact variant against the product label or manufacturer datasheet
- Programming: procedure depends on the receiver / automation controller
- Exported product details: frequency 433.92 MHz
- Exported product details: channels 4
- Exported product details: Fixed Code
- Exported product details: battery CR2032
ROGER M80/TX44R Kit Includes
- 1 × ROGER M80/TX44R Remote Control (quantity and accessories subject to the actual SKU/package)
ROGER M80/TX44R Applications
- Villas and private residential automatic gates
- Apartment and residential-complex access entrances
- Commercial building and office parking entries
- Warehouse and industrial site access where receiver compatibility is confirmed
- Garage door, sliding gate, swing gate or barrier automation only if supported by the installed radio system
Why Choose ROGER M80/TX44R?
- Dedicated ROGER M80/TX44R model identification helps order the intended replacement or additional access unit
- ROGER range alignment supports clear receiver and transmitter compatibility checks
- Practical option for controlled property access when correctly paired and programmed
- Appropriate for UAE residential and commercial maintenance and upgrade projects
ROGER M80/TX44R Remote Control Supply & Programming Services in UAE
We supply ROGER gate remote controls and related automation accessories across Dubai, Sharjah, Abu Dhabi, Ajman, Al Ain, Ras Al Khaimah, Fujairah and Umm Al Quwain. Our team can help identify the required ROGER M80/TX44R variant, check transmitter/receiver compatibility, and arrange programming, setup or receiver replacement where supported. Programming and site-service charges depend on the equipment and location; contact us for availability and a quotation.
ROGER M80/TX44R FAQs
Will the ROGER M80/TX44R work with any gate motor?
No. The ROGER M80/TX44R must match the installed receiver, operating frequency and coding system. Confirm compatibility before purchase.
Can this model replace an older remote?
Possibly, provided the receiver supports the ROGER M80/TX44R and the required programming method. Check the original transmitter and receiver reference.
Can this remote be programmed on site in the UAE?
Yes, where the receiver allows enrolment and access permissions are available. Contact us with the receiver and current remote details.
What is supplied with this product?
The listed unit or set is supplied according to the actual selected SKU. Additional receivers, batteries, mounting accessories or installation are not included unless specifically stated in the order.
Why Choose Us?
We focus on automatic gate motors, garage door systems, parking barriers, access-control accessories and remote-control programming throughout the UAE. Our team can assist with product identification, compatibility advice, supply and professional programming or installation services for supported systems. We aim to recommend the correct part for your existing automation setup rather than a remote selected by appearance alone.
ROGER M80/TX44R Original Product Information
ROGER M80/TX44R Remote Control – Italian ROGER Technology radio engineering for Automatic Gate Access
The ROGER M80/TX44R is a remote control transmitter designed for compatible ROGER access systems. It can provide convenient wireless operation for automatic sliding gates, swing gates, garage doors and parking barriers where receiver compatibility is confirmed. Suitable for replacement or additional-user requirements across the United Arab Emirates. Key technical details include channels 4, frequency 433.92 MHz, coding Fixed Code, battery CR2032 3V. For reliable operation, the transmitter frequency, coding system and receiver family should always match the installed automation.
ROGER M80/TX44R Features
- 4-channel ROGER transmitter
- 433.92 MHz AM/ASK radio operation
- Fixed Code technology
- Compact 38 × 68 × 11 mm family housing
- CR2032 3V lithium battery
- Up to approx. 150 m open-field range
- Copy function supported for compatible fixed-code modes
ROGER M80/TX44R Technical Specifications
- Brand: ROGER Technology
- Model: M80/TX44R
- Channels: 4
- Frequency: 433.92 MHz
- Coding: Fixed Code
- Modulation: AM/ASK
- Power Supply: 3V DC
- Battery: CR2032 3V
- Current Absorption: 8 mA
- Operating Temperature: -10°C to +55°C
- Maximum Open-Field Range: Approx. 150 m
- Dimensions: Approx. 38 × 68 × 11 mm
- Code Combinations: 65,536
ROGER M80/TX44R Kit Includes
- 1 × ROGER M80/TX44R remote control
- 1 × CR2032 3V battery
ROGER M80/TX44R Applications
- Automatic sliding gates
- Automatic swing gates
- Garage door openers
- Parking gate barriers
- Residential and commercial access automation
ROGER M80/TX44R Compatibility & Programming
Compatibility: Use with compatible ROGER Technology radio receivers supporting the same coding family. Fixed-code and rolling-code versions are not interchangeable unless the receiver supports the selected mode.
Programming: Program through the compatible ROGER receiver. Fixed-code copy functionality is supported on specified models according to ROGER programming instructions.
Why Choose ROGER M80/TX44R?
- Model-specific solution for compatible ROGER radio systems
- Useful as a replacement or additional access-control component when compatibility is confirmed
- Designed for convenient wireless gate, garage or barrier operation
- Technical specifications and programming requirements researched for easier product selection
Why Choose Sliding Gate Motor UAE?
- Gate automation products and accessories supplied across the United Arab Emirates
- Compatibility assistance for remote controls, receivers and gate control boards
- Programming and technical support available for compatible automation systems
- Products for residential, commercial and industrial access applications
ROGER M80/TX44R FAQs
What frequency does ROGER M80/TX44R use?
ROGER M80/TX44R operates on 433.92 MHz. It uses Fixed Code coding.
Is ROGER M80/TX44R compatible with my gate motor?
Use with compatible ROGER Technology radio receivers supporting the same coding family. Fixed-code and rolling-code versions are not interchangeable unless the receiver supports the selected mode.
How do I program ROGER M80/TX44R?
Program through the compatible ROGER receiver. Fixed-code copy functionality is supported on specified models according to ROGER programming instructions.
What battery does ROGER M80/TX44R use?
The listed battery is CR2032 3V.
Can ROGER M80/TX44R be used as an additional remote?
Yes, provided the installed receiver has available memory and the transmitter frequency/coding are compatible. It must be programmed using the correct receiver procedure.
