ROGER Fifthy 24V Flashing Light UAE

ROGER Fifthy 24V Flashing Light in UAE

ROGER Fifthy 24V – Italian ROGER TECHNOLOGY 24 V LED signalling with integrated 433.92 MHz antenna

ROGER Fifthy 24V is a professional flashing, warning and blinker light for compatible automatic gate, barrier, garage-door or access-automation systems. It provides a clear visual indication while the connected automation is opening, closing or otherwise operating, helping drivers, pedestrians and property users recognise that automated equipment is in motion.

Built around Italian automation engineering, this model is suitable for professional automation projects in the United Arab Emirates. The light should be matched to the exact control-board output voltage, flashing logic and wiring requirements before installation. Flashing lights improve visual awareness but should be used together with the correct photocells, safety devices and mechanical safeguards required by the gate system.

ROGER Fifthy 24V Flashing Light Features

• 24 V AC/DC LED warning light
• Integrated 433.92 MHz antenna
• IP55 weather protection
• 24-LED high-visibility light source
• 1 Hz flashing modulation

ROGER Fifthy 24V Flashing Light Technical Specifications

• Model: FIFTHY/24/OR
• Power Supply: 24 V AC/DC ±10%
• Operating Temperature: -20°C to +55°C
• Protection Rating: IP55
• Maximum Flasher Load: 6.5 W
• Antenna Frequency: 433.920 MHz
• Modulation: 1 Hz
• Light Source: 24 LEDs
• Dimensions: 124 × 45 × 164 mm

Specification / Compatibility Note: Use only with a compatible 24 V flashing-light output. It is not interchangeable with the mains-voltage FIFTHY/230 version.

ROGER Fifthy 24V Flashing Light Applications

• 24 V ROGER sliding gates
• 24 V ROGER swing gates
• Automatic access systems
• Residential entrances
• Commercial gate automation

ROGER Fifthy 24V Flashing Light Compatibility, Installation & Safety

Before installing the ROGER Fifthy 24V, confirm the control-board flashing-light output, AC/DC supply, required flashing behaviour, mounting position and any antenna connection. Mount the warning light where it is clearly visible from the vehicle and pedestrian approach without interfering with gate movement. After wiring, test the complete opening and closing cycle and confirm the light operates exactly as intended.

Why Choose ROGER Fifthy 24V?

• Model-specific warning-light solution for ROGER Fifthy 24V
• Clear visual signalling during automatic gate or barrier movement
• Suitable for replacement, maintenance and new automation projects
• Technical compatibility can be checked before installation
• Supports professional residential, commercial and industrial access automation

Why Choose Sliding Gate Motor UAE?

• Specialist automatic gate, barrier, garage and access-control product range
• Compatibility guidance using the motor, control-board and accessory model
• Professional installation, wiring, programming and testing support
• Replacement control boards, remotes, photocells and automation accessories available
• Delivery and technical support across the United Arab Emirates

Frequently Asked Questions About ROGER Fifthy 24V

What is the ROGER Fifthy 24V used for?

The ROGER Fifthy 24V provides a visible warning while a compatible automatic gate, barrier or access automation system is operating.

What power supply does the ROGER Fifthy 24V use?

The verified supply information for this model or product family is 24 V AC/DC ±10%. Always confirm the product label and control-board output before wiring.

Can the ROGER Fifthy 24V be used with sliding gates, swing gates or barriers?

Yes, where the control board is electrically and functionally compatible. Compatibility should be confirmed by the automation model and output specification rather than by gate type alone.

Does a flashing light replace gate safety sensors?

No. A warning light provides visual signalling only. It does not replace photocells, safety edges, obstacle detection or other safety devices required for the installation.

Is installation support available in the United Arab Emirates?

Yes. Professional compatibility checking, installation, wiring and operational testing can be arranged for suitable automation systems across the United Arab Emirates.

Need Help with ROGER Fifthy 24V?

Send us the gate or barrier brand, control-board model, existing warning-light details and clear photographs. Our team can help confirm whether the ROGER Fifthy 24V is suitable and advise on wiring, replacement and testing in the United Arab Emirates.