ROGER 600 KG Sliding Gate Motor UAE – Product Introduction
The ROGER 600 KG is a sliding gate automation solution from ROGER, offered for gates in the United Arab Emirates. It is designed to automate the horizontal opening and closing of a compatible sliding gate, replacing manual operation with controlled movement and convenient access. The system can be considered for residential and light-commercial entrances when the actual gate dimensions, load, track condition, usage frequency and safety requirements suit the selected operator.
For property owners, facilities teams and contractors in Dubai, Sharjah, Abu Dhabi, Ajman, Al Ain, Ras Al Khaimah, Fujairah and Umm Al Quwain, ROGER 600 KG can form part of a professionally installed automated entrance. Typical system elements include a motor drive, gear rack and control equipment, with optional remote activation, safety photocells, flashing warnings and approved access-control integrations. The exact compatible accessories and supplied parts depend on the manufacturer version and selected package.
As a Italian-engineered brand product, ROGER offers a recognized range of gate automation equipment. This model is identified in the product name with a 600 kg gate-weight rating; this is not a substitute for checking the manufacturer’s precise model variant, operating limits and installation manual. For everyday use, correct track alignment, freely rolling gate wheels and suitable capacity reserve are essential for reliable operation.
The correct opening and closing speeds, slowdown behavior and obstruction response depend on the manufacturer specification and commissioning settings. Automation can be paired with suitable remote-control and access-control options where supported. Professional installation should include checking the gate structure and travel limits, setting the motor and rack alignment, programming the controller, testing obstacle detection and safety photocells, and providing operating guidance to the end user.
Important selection guidance: A stated maximum gate weight is not a guarantee of suitability for every gate of that weight. The recommended model depends on gate length, wind exposure, wheel and rail condition, friction, opening frequency and ambient operating conditions. Confirm availability, accessories and official technical limits before ordering.
ROGER 600 KG – Italian Gate Automation Overview
The ROGER 600 KG is an automatic sliding gate operator for projects in the United Arab Emirates. Roger Technology is an Italian automation manufacturer focused on gate operators, electronics and high-performance access automation. This product is intended for professional sliding-gate automation where motor capacity, gate length, track condition, rack alignment and daily operating demand are correctly matched.
With a referenced maximum gate-weight class of 600 kg, the ROGER H30 600 KG is suited to residential and light-commercial entrances within its engineering limits. The final motor selection should always consider actual rolling resistance, gate length, wheel and track condition, wind loading, operating frequency and required safety accessories—not gate weight alone.
ROGER 600 KG Features
- Designed for sliding gates in the 600 kg capacity class, subject to gate condition, length and installation geometry.
- Power supply: 230 V AC.
- Gate movement speed: 9.5 m/min.
- Maximum thrust: 300 N.
- Control unit: H70/104AC family.
- Position feedback: Optical encoder.
- Gate limit management: Mechanical.
- Duty rating: 50%.
- Protection rating: IP44.
ROGER 600 KG Technical Specifications
| Brand | Roger |
| Model | ROGER H30 600 KG |
| Product type | Automatic sliding gate motor / operator |
| Maximum gate weight | 600 kg |
| Power supply | 230 V AC |
| Motor power | 240 W |
| Maximum thrust | 300 N |
| Duty | 50% |
| Gate speed | 9.5 m/min |
| Capacitor | 12.5 µF |
| Rack pinion | Module 4 Z15 |
| Protection | IP44 |
| Operating temperature | -20°C to +55°C |
| Control unit | H70/104AC family |
| Position feedback | Optical encoder |
| Limit switch | Mechanical |
ROGER 600 KG Kit Includes
- 1 x ROGER H30 600 KG Sliding Gate Motor
- 1 x Integrated ROGER Control Unit
- 2 x ROGER E80 Remote Controls
- 1 x Pair of ROGER R90 Safety Photocells
- 1 x ROGER Blinker Light
- 4 x Nylon Gear Racks – 1 Meter Each
- 1 x Push Button
- 1 x Motor Fixing Plate
ROGER 600 KG Applications
- Villas and larger residential sliding gates
- Apartment buildings and managed residential compounds
- Offices, workshops and light-commercial vehicle entrances
- Small warehouses and controlled parking access points
ROGER 600 KG Supply & Installation Services in UAE
The ROGER H30 600 KG should be installed on a structurally sound sliding gate that moves freely by hand. Correct motor foundation, pinion/rack alignment, electrical protection and limit setup are essential for reliable operation. Depending on the installed control unit, the system can be combined with compatible remote controls, photocells, flashing warning lights, GSM gate openers, keypads, RFID/access-control devices and other dry-contact control accessories.
Compatible Gate Automation Accessories
- Compatible gate remote controls and radio receiver modules
- Photocells and safety sensors
- Flashing / warning lights
- GSM gate openers and compatible access-control relay devices
- Correct gear rack and mounting accessories for the motor pinion
- Control boards, spare parts and backup-power accessories where supported by the exact model
Why Choose ROGER 600 KG?
- Italian Gate Automation Engineering with a product platform developed specifically for automatic sliding-gate control.
- A 600 kg class rating gives a clear application range when the gate is correctly sized and maintained.
- Dedicated control architecture: H70/104AC family.
- Position management uses Optical encoder.
- IP44 protection class on the referenced configuration supports properly installed outdoor automation.
- A strong option for replacement or new projects when the exact gate weight, length, rack, duty cycle and site conditions are verified.
Why Choose ROGER 600 KG?
ROGER 600 KG can support convenient vehicle access, controlled gate movement and integration with suitable entrance safety components. Its best advantage is achieved when the specified operator capacity and controller functions suit the site, with the installation correctly aligned and tested. For UAE projects, this helps create an accessible automated entrance for property owners, residents, employees and approved visitors.
Why Choose Us – Sliding Gate Motor UAE
- Gate automation products for residential, commercial and industrial applications.
- Product-selection assistance based on gate size, weight, usage and control requirements.
- Professional installation, setup, programming and testing services subject to availability.
- Compatible remote controls, photocells, control boards, GSM openers and spare parts support.
- Delivery and project support across the United Arab Emirates.
- After-sales technical assistance for compatible gate automation products.
ROGER 600 KG FAQs
What gate weight can the ROGER 600 KG automate?
The referenced maximum gate-weight class is 600 kg. This is a maximum product rating, not a guarantee for every 600 kg gate. Gate length, wheel/track condition, rolling resistance, duty cycle and site conditions must also be checked.
What power supply does the ROGER 600 KG use?
The referenced configuration uses 230 V AC. Always confirm the exact product code and local wiring requirements before installation.
Can the ROGER 600 KG work with photocells, remote controls and a GSM gate opener?
Usually yes when the compatible control board provides the required safety, radio and dry-contact inputs. Photocells, receivers, remotes and GSM/access-control devices must be matched to the controller and correctly programmed.
Is the ROGER 600 KG suitable for use in the United Arab Emirates?
It is designed for automatic gate applications and can be used in UAE projects when installed within the manufacturer's environmental limits, with suitable weather protection, electrical protection and regular maintenance. Referenced specifications include IP44 and -20°C to +55°C.
Do you provide installation and programming for the ROGER 600 KG?
Sliding Gate Motor UAE can assist with product selection and can provide professional installation, setup, programming and testing services in the United Arab Emirates, subject to product and location availability.
Product selection note: Maximum gate-weight ratings are manufacturer limits under defined conditions. For reliable long-term operation, confirm gate length, wheel and track condition, rack alignment, opening frequency, wind/loading and safety requirements before final motor selection.
