NICE TOONA 7 – Italian 24V Heavy-Duty Swing Gate Engineering for Very Long Gate Leaves
The NICE TOONA 7 is a heavy-duty Italian 24V linear swing gate operator developed for very long gate leaves and demanding professional installations. The TO7024 configuration combines strong thrust, a long 584 mm travel and magnetic encoder feedback with the advanced NICE MC824H control platform.
Designed for professional automatic swing gate projects in the United Arab Emirates, NICE TOONA 7 can be integrated with a correctly matched control board, remote controls, safety photocells, warning light and access-control accessories. Final motor selection should always consider the physical gate, hinge condition, pillar geometry, wind exposure, opening angle and expected operating frequency rather than relying on gate weight alone.
TOONA 7 Features
- Designed for very long gate leaves up to approximately 7 m subject to weight/geometry limits
- 24V DC operation for advanced control and intensive-use applications
- Maximum absorbed power around 120W and nominal power around 60W
- Maximum force around 2700 N and nominal force around 1400 N
- Maximum actuator speed around 0.013 m/s
- Approx. 584 mm travel
- Magnetic encoder position feedback
- Mechanical opening and closing stops
- Nominal use rating around 41 cycles/hour
- IP44 protection and -20°C to +50°C operating range
- Designed for NICE MC824H control with compatible OXIBD receiver and BlueBUS safety devices
TOONA 7 Technical Specifications
| Brand | NICE |
| Series | TOONA 7 |
| Motor Model | TO7024 |
| Motor Power Supply | 24V DC |
| Maximum Current | Approx. 5A |
| Nominal Current | Approx. 2.5A |
| Maximum Absorbed Power | Approx. 120W |
| Nominal Power | Approx. 60W |
| Maximum Force | Approx. 2700 N |
| Nominal Force | Approx. 1400 N |
| Maximum Speed | Approx. 0.013 m/s |
| Travel | Approx. 584 mm |
| Maximum Gate Leaf Length | Up to approx. 7 m* |
| Gate Weight | Depends on leaf length and geometry* |
| Nominal Cycles | Approx. 41 cycles/hour |
| Position Feedback | Magnetic encoder |
| Travel Stops | Mechanical open/close |
| Protection Rating | IP44 |
| Operating Temperature | -20°C to +50°C |
| Approx. Dimensions | 1200 x 128 x 150 mm |
| Approx. Weight | 15 kg |
| Recommended Control Unit | NICE MC824H |
| Country of Origin | Italy |
Product Selection / Specification Note: For long gate leaves an electric lock may be required. Use MC824H for TO7024; do not pair this 24V model with the 230V MC800 controller.
TOONA 7 Kit Includes
The following package contents are based on researched complete-kit configurations for this model or the corresponding manufacturer kit:
- 2 x NICE TO7024 swing gate operators
- 1 x NICE MC824H control unit
- 1 x NICE OXIBD / compatible receiver
- 2 x NICE remote controls
- 1 x Pair of NICE EPMB / compatible BlueBUS photocells
- 1 x NICE flashing warning light
- Motor mounting bracket sets
- Electric lock where required for long leaves
Kit contents may vary by market, stock package or manufacturer revision. Please confirm the exact supplied items before ordering, especially control boards, receiver models, remote-control types, foundation boxes or electric locks.
TOONA 7 Applications
- Very large villa and estate gates
- Commercial and institutional entrances
- Long-leaf double swing gates
- High-use 24V automation projects
- Professional gate systems requiring encoder feedback and BlueBUS integration
TOONA 7 Supply & Installation Services
For reliable operation, the gate should move freely by hand before automation is installed. The hinges, stops, posts or pillars and mounting points should be structurally sound. Correct motor geometry is particularly important on swing gates because bracket position directly affects actuator travel, leverage, opening angle and the load placed on the motor.
A professional installation normally includes motor and bracket positioning, control-panel wiring, limit or travel setup, remote-control programming, safety-photocell alignment, automatic-closing configuration where required, force or torque adjustment, manual-release testing and final commissioning. Electrical installation should follow the manufacturer's instructions and applicable site requirements.
NICE TOONA 7 Compatible Accessories & Access Control
Depending on the selected NICE control board and product revision, NICE TOONA 7 can be combined with compatible accessories such as:
- Manufacturer-compatible remote controls and radio receivers
- Infrared safety photocells and other supported safety devices
- Flashing / warning lights
- Push buttons and key switches
- GSM gate openers and dry-contact mobile access controllers
- Keypads, RFID readers, intercom systems and access-control relays
- Electric locks where required by gate length, wind load or manufacturer guidance
- Battery backup or low-voltage accessories where supported by the exact 24V control system
Accessory voltage, input type and radio compatibility should be checked before connection. Do not assume that an accessory from the same brand is compatible with every controller generation.
Why Choose NICE TOONA 7?
NICE TOONA 7 is suitable for customers looking for a model-specific NICE swing gate automation solution with documented technical parameters, established control electronics and the ability to integrate safety and access-control equipment. Its selection should be based on the actual gate dimensions and usage profile so the motor operates with an appropriate mechanical margin rather than continuously at its maximum limit.
Why Choose Us – Sliding Gate Motor UAE
- Technical assistance to match the motor with gate leaf length, weight, hinge geometry and expected usage
- Support identifying compatible control boards, remotes, photocells and access-control accessories
- Professional installation, programming and testing services subject to project location and availability
- Gate automation products and spare-part support for established international manufacturers
- Delivery support across the United Arab Emirates
- After-sales assistance for compatible automation equipment and system setup
TOONA 7 FAQs
What gate is NICE TOONA 7 suitable for?
NICE TOONA 7 should be selected according to gate leaf length (Up to approx. 7 m*), hinge position, opening angle, wind loading, gate construction and expected daily usage. Published capacities assume a correctly aligned, freely moving gate and suitable installation geometry.
What power supply and control system does NICE TOONA 7 use?
The researched configuration uses 24V DC. The referenced control platform is NICE MC824H. The exact board, transformer and accessory wiring should always be confirmed against the supplied product revision before installation.
What is included with the NICE TOONA 7 kit?
Researched complete-kit configurations commonly include 2 x NICE TO7024 swing gate operators, 1 x NICE MC824H control unit, 1 x NICE OXIBD / compatible receiver, 2 x NICE remote controls. Exact kit contents can vary by market, distributor and product revision, so the final supplied package should be confirmed on the quotation or order.
Can NICE TOONA 7 be opened manually during a power failure?
Yes, the researched NICE automation configuration provides a manual or emergency release arrangement. The release method differs by operator type, so the installer should demonstrate the correct procedure after commissioning.
Can NICE TOONA 7 work with photocells, remotes, GSM or access control?
Yes, when connected through the compatible NICE control system, the operator can be integrated with supported remote receivers, safety photocells, flashing lights, push buttons and access-control devices such as GSM controllers, keypads or intercom relays. Compatibility must be checked before wiring.
Is professional installation available for NICE TOONA 7 in the United Arab Emirates?
Professional installation, setup, programming and testing can be arranged subject to product availability, project requirements and location. Correct bracket geometry, gate condition, safety-device positioning and final force/travel settings are important for reliable operation.
Need Help with NICE TOONA 7?
For product selection, provide the gate leaf length, approximate gate weight, number of leaves, pillar and hinge dimensions, required opening angle, expected daily usage and clear photographs of the entrance. This information helps confirm whether NICE TOONA 7 is suitable and which control, safety and access-control accessories should be included.
TOONA 7 is a specialist swing gate automation option for projects where the correct actuator type, gate-leaf dimensions, mounting geometry and intended usage are essential. Choosing the appropriate model helps deliver reliable movement, easier access and compatibility with correctly selected safety and control accessories. Our team can help compare this motor with alternatives for your gate.
