NICE EPM Photocell Sensor – Italian-Engineered Conventional Gate Safety Technology
NICE EPM is a professional photocell safety sensor designed to improve obstacle detection and operational safety in compatible automatic gate, door or barrier systems. It uses infrared or optical detection technology to monitor the protected opening and provide a safety signal to the automation controller when the beam is interrupted.
Developed with Italian-engineered conventional gate safety technology, the NICE EPM is suitable for professional automation projects in the United Arab Emirates. Key verified technical characteristics include a specified detection range of 15 m, 24 v setting: 18–35 vdc / 15–28 vac; 12 v setting: 10–18 vdc / 9–15 vac, IP44 enclosure protection. The final safety response—such as stopping, preventing closing or reversing movement—is determined by the connected control board and its programming.
NICE EPM Photocell Sensor Features
- Conventional wired transmitter/receiver photocell pair
- Relay-output safety connection for compatible control boards
- Up to 15 m nominal range
- Selectable 12 V or 24 V operating configuration
- IP44 protection
- Designed for standard PHOTO/safety inputs rather than BlueBUS
NICE EPM Photocell Sensor Technical Specifications
- Brand: NICE
- Model: EPM
- Product Type: Conventional relay-output infrared photocell pair
- Nominal Range: 15 m
- 24 V Setting: 18–35 Vdc / 15–28 Vac
- 12 V Setting: 10–18 Vdc / 9–15 Vac
- Protection Rating: IP44
- Dimensions: Approx. 50 × 29 × 80 mm
- Connection: Separate power + relay safety output
NICE EPM Photocell Sensor Applications
- Automatic sliding gates
- Automatic swing gates
- Parking gate barriers
- Residential villa entrances
- Commercial and industrial gate automation
- Access-control safety zones and vehicle entrances
NICE EPM Compatibility, Installation & Safety
This is a conventional wired relay-output photocell. It should be connected only to a controller that provides the correct accessory power supply and relay-type PHOTO/safety input. It is not a NICE BlueBUS device.
Why Choose NICE EPM?
- Model-specific design and verified technical data for NICE EPM
- Reliable obstacle-detection input for compatible automation controllers
- Suitable for replacement, maintenance and new automation projects
- Supports safer automatic gate or barrier operation when correctly installed
- Professional compatibility checking is possible before installation
Why Choose Sliding Gate Motor UAE?
- Specialist automatic gate, barrier, garage and access-control product range
- Compatibility guidance using the motor, control-board and accessory model
- Professional installation, wiring, alignment and testing support
- Replacement photocells, control boards, remotes and automation spare parts available
- Delivery and technical support across the United Arab Emirates
Frequently Asked Questions About NICE EPM
What is the NICE EPM used for?
It is used as an optical safety sensor for compatible automatic gate, door or barrier systems. When the protected beam is interrupted, the sensor changes its safety output or BUS status so the control board can react according to its programmed logic.
What is the detection range of the NICE EPM?
The verified specification for this model is 15 m. Actual reliable range can be affected by alignment, installation geometry, weather, contamination and the exact product variant.
What power supply or connection does the NICE EPM use?
24 V Setting: 18–35 Vdc / 15–28 Vac; 12 V Setting: 10–18 Vdc / 9–15 Vac. Always follow the exact terminal diagram for the supplied version and the connected gate control board.
Can the NICE EPM be used with sliding and swing gates?
It can be used where the automation controller is electrically and functionally compatible with this sensor. Compatibility should be checked by control-board model rather than by gate type alone.
Is installation support available in the United Arab Emirates?
Yes. Professional compatibility checking, installation, alignment, programming support and safety testing can be arranged for suitable automation systems across the United Arab Emirates.
Need Help with NICE EPM?
Send us the gate motor brand, control-board model, existing photocell model and clear photographs of the installation. Our team can help confirm whether the NICE EPM is suitable and advise on replacement, wiring, alignment and testing in the United Arab Emirates.
