NICE TOONA 5 Swing Gate Motor UAE

NICE TOONA 5 – Italian Heavy-Duty 230V Linear Swing Gate Engineering for Gate Leaves up to 5 Metres

The NICE TOONA 5 is a professional Italian linear swing gate operator family for large residential and commercial entrances. For this workbook the technical profile is based on the TO5016/closely related 230V Toona 5 configuration used in UAE listings, with long travel, strong thrust and MC800 control compatibility.

Designed for professional automatic swing gate projects in the United Arab Emirates, NICE TOONA 5 can be integrated with a correctly matched control board, remote controls, safety photocells, warning light and access-control accessories. Final motor selection should always consider the physical gate, hinge condition, pillar geometry, wind exposure, opening angle and expected operating frequency rather than relying on gate weight alone.

Toona 5 Features

• Heavy-duty linear actuator suitable for gate leaves up to approximately 5 m
• 230V AC operation with up to approximately 340W absorbed power in referenced configuration
• Maximum force around 1800 N and nominal force around 600 N
• Maximum speed around 0.013 m/s
• Long actuator travel around 505 mm
• Electrical opening and closing limit switches in referenced TO5016 configuration
• Nominal rating around 54 cycles/hour
• Robust aluminium operator body for professional installations
• IP44 protection and -20°C to +50°C operating range
• Compatible with NICE MC800 control, OXI receiver and EPM safety photocells

Toona 5 Technical Specifications

Toona 5 Kit Includes

The following package contents are based on researched complete-kit configurations for this model or the corresponding manufacturer kit:

• 2 x NICE TOONA 5 / TO5016 swing gate operators
• 1 x NICE MC800 control unit
• 2 x NICE FLO2RE / compatible NICE remote controls
• 1 x NICE OXI receiver
• 1 x Pair of NICE EPM safety photocells
• 1 x NICE flashing warning light
• Motor mounting brackets
• 1 x Push button where supplied

Kit contents may vary by market, stock package or manufacturer revision. Please confirm the exact supplied items before ordering, especially control boards, receiver models, remote-control types, foundation boxes or electric locks.

Toona 5 Applications

• Large villa swing gates
• Private estates
• Commercial gates
• Long-leaf double swing gates
• Professional NICE automation installations requiring higher thrust and duty capability

Toona 5 Supply & Installation Services

For reliable operation, the gate should move freely by hand before automation is installed. The hinges, stops, posts or pillars and mounting points should be structurally sound. Correct motor geometry is particularly important on swing gates because bracket position directly affects actuator travel, leverage, opening angle and the load placed on the motor.

A professional installation normally includes motor and bracket positioning, control-panel wiring, limit or travel setup, remote-control programming, safety-photocell alignment, automatic-closing configuration where required, force or torque adjustment, manual-release testing and final commissioning. Electrical installation should follow the manufacturer's instructions and applicable site requirements.

NICE TOONA 5 Compatible Accessories & Access Control

Depending on the selected NICE control board and product revision, NICE TOONA 5 can be combined with compatible accessories such as:

• Manufacturer-compatible remote controls and radio receivers
• Infrared safety photocells and other supported safety devices
• Flashing / warning lights
• Push buttons and key switches
• GSM gate openers and dry-contact mobile access controllers
• Keypads, RFID readers, intercom systems and access-control relays
• Electric locks where required by gate length, wind load or manufacturer guidance
• Battery backup or low-voltage accessories where supported by the exact 24V control system

Accessory voltage, input type and radio compatibility should be checked before connection. Do not assume that an accessory from the same brand is compatible with every controller generation.

Why Choose NICE TOONA 5?

NICE TOONA 5 is suitable for customers looking for a model-specific NICE swing gate automation solution with documented technical parameters, established control electronics and the ability to integrate safety and access-control equipment. Its selection should be based on the actual gate dimensions and usage profile so the motor operates with an appropriate mechanical margin rather than continuously at its maximum limit.

Why Choose Us – Sliding Gate Motor UAE

• Technical assistance to match the motor with gate leaf length, weight, hinge geometry and expected usage
• Support identifying compatible control boards, remotes, photocells and access-control accessories
• Professional installation, programming and testing services subject to project location and availability
• Gate automation products and spare-part support for established international manufacturers
• Delivery support across the United Arab Emirates
• After-sales assistance for compatible automation equipment and system setup

Toona 5 FAQs

What gate is NICE TOONA 5 suitable for?

NICE TOONA 5 should be selected according to gate leaf length (Up to approx. 5 m), hinge position, opening angle, wind loading, gate construction and expected daily usage. Published capacities assume a correctly aligned, freely moving gate and suitable installation geometry.

What power supply and control system does NICE TOONA 5 use?

The researched configuration uses 230V AC. The referenced control platform is NICE MC800. The exact board, transformer and accessory wiring should always be confirmed against the supplied product revision before installation.

What is included with the NICE TOONA 5 kit?

Researched complete-kit configurations commonly include 2 x NICE TOONA 5 / TO5016 swing gate operators, 1 x NICE MC800 control unit, 2 x NICE FLO2RE / compatible NICE remote controls, 1 x NICE OXI receiver. Exact kit contents can vary by market, distributor and product revision, so the final supplied package should be confirmed on the quotation or order.

Can NICE TOONA 5 be opened manually during a power failure?

Yes, the researched NICE automation configuration provides a manual or emergency release arrangement. The release method differs by operator type, so the installer should demonstrate the correct procedure after commissioning.

Can NICE TOONA 5 work with photocells, remotes, GSM or access control?

Yes, when connected through the compatible NICE control system, the operator can be integrated with supported remote receivers, safety photocells, flashing lights, push buttons and access-control devices such as GSM controllers, keypads or intercom relays. Compatibility must be checked before wiring.

Is professional installation available for NICE TOONA 5 in the United Arab Emirates?

Professional installation, setup, programming and testing can be arranged subject to product availability, project requirements and location. Correct bracket geometry, gate condition, safety-device positioning and final force/travel settings are important for reliable operation.

Need Help with NICE TOONA 5?

For product selection, provide the gate leaf length, approximate gate weight, number of leaves, pillar and hinge dimensions, required opening angle, expected daily usage and clear photographs of the entrance. This information helps confirm whether NICE TOONA 5 is suitable and which control, safety and access-control accessories should be included.