LIFE OP3 UNI – Italian Engineered 230V Swing Gate Automation for Residential and Commercial Gates
The LIFE OP3 UNI is an Italian-engineered irreversible electromechanical linear operator developed for dependable automation of single- or double-leaf swing gates. Its aluminium construction, 337 mm stroke, 2000 N thrust and 230V AC motor make it a practical choice for villa entrances, residential compounds and compatible commercial gates where smooth, repeatable operation is required.
Designed for professional automatic swing gate projects in the United Arab Emirates, LIFE OP3 UNI can be integrated with a correctly matched control board, remote controls, safety photocells, warning light and access-control accessories. Final motor selection should always consider the physical gate, hinge condition, pillar geometry, wind exposure, opening angle and expected operating frequency rather than relying on gate weight alone.
LIFE OP3 UNI Features
- Designed for swing gate leaves up to 3 metres, subject to gate weight, hinge geometry and wind load
- 230V AC irreversible electromechanical operator with 210W rated motor power
- Up to 2000 N thrust for controlled gate movement
- 337 mm actuator stroke with approximately 19-second opening time through 90° under specified conditions
- Mechanical opening and closing stops on the OP3 UNI version
- Quick manual release mechanism for emergency operation during power failure
- Full aluminium motor construction with polyester-coated housing for outdoor installation
- IP54 protection and 35% duty cycle for residential and compatible commercial applications
- Compatible with LIFE control electronics, rolling-code remotes, VISIO photocells and SUNLED warning light
LIFE OP3 UNI Technical Specifications
| Brand | LIFE |
| Series | OPTIMO |
| Motor Model | OP3 UNI |
| Complete Kit Reference | SETUP OP3 UNI DL 942M |
| Motor Type | Irreversible electromechanical linear swing gate operator |
| Maximum Gate Leaf Length | Up to 3 m |
| Motor Power Supply | 230V AC |
| Rated Motor Power | 210W |
| Maximum Thrust | 2000 N |
| Rod Stroke | 337 mm |
| Opening Time | Approx. 19 seconds / 90° |
| Duty Cycle | 35% |
| Opening / Closing Stops | Mechanical |
| Protection Rating | IP54 |
| Operating Temperature | -20°C to +70°C |
| Installation | External / surface-mounted swing gate operator |
| Country of Origin | Italy |
LIFE OP3 UNI Kit Includes
The following package contents are based on researched complete-kit configurations for this model or the corresponding manufacturer kit:
- 2 x LIFE OP3 UNI 230V swing gate motors
- 1 x LIFE GE UNI RS DL control unit with integrated receiver
- 2 x LIFE MAXI2 433.92 MHz rolling-code remote controls
- 1 x Pair of LIFE VISIO outdoor safety photocells
- 1 x LIFE SUNLED flashing warning light
- 2 x Motor fixing bracket sets
Kit contents may vary by market, stock package or manufacturer revision. Please confirm the exact supplied items before ordering, especially control boards, receiver models, remote-control types, foundation boxes or electric locks.
LIFE OP3 UNI Applications
- Villa and residential swing gates
- Private compound entrances
- Double-leaf residential gate automation
- Light-to-medium commercial entrances
- Automatic gates requiring remote, photocell or access-control integration
LIFE OP3 UNI Supply & Installation Services
For reliable operation, the gate should move freely by hand before automation is installed. The hinges, stops, posts or pillars and mounting points should be structurally sound. Correct motor geometry is particularly important on swing gates because bracket position directly affects actuator travel, leverage, opening angle and the load placed on the motor.
A professional installation normally includes motor and bracket positioning, control-panel wiring, limit or travel setup, remote-control programming, safety-photocell alignment, automatic-closing configuration where required, force or torque adjustment, manual-release testing and final commissioning. Electrical installation should follow the manufacturer's instructions and applicable site requirements.
LIFE OP3 UNI Compatible Accessories & Access Control
Depending on the selected LIFE control board and product revision, LIFE OP3 UNI can be combined with compatible accessories such as:
- Manufacturer-compatible remote controls and radio receivers
- Infrared safety photocells and other supported safety devices
- Flashing / warning lights
- Push buttons and key switches
- GSM gate openers and dry-contact mobile access controllers
- Keypads, RFID readers, intercom systems and access-control relays
- Electric locks where required by gate length, wind load or manufacturer guidance
- Battery backup or low-voltage accessories where supported by the exact 24V control system
Accessory voltage, input type and radio compatibility should be checked before connection. Do not assume that an accessory from the same brand is compatible with every controller generation.
Why Choose LIFE OP3 UNI?
LIFE OP3 UNI is suitable for customers looking for a model-specific LIFE swing gate automation solution with documented technical parameters, established control electronics and the ability to integrate safety and access-control equipment. Its selection should be based on the actual gate dimensions and usage profile so the motor operates with an appropriate mechanical margin rather than continuously at its maximum limit.
Why Choose Us – Sliding Gate Motor UAE
- Technical assistance to match the motor with gate leaf length, weight, hinge geometry and expected usage
- Support identifying compatible control boards, remotes, photocells and access-control accessories
- Professional installation, programming and testing services subject to project location and availability
- Gate automation products and spare-part support for established international manufacturers
- Delivery support across the United Arab Emirates
- After-sales assistance for compatible automation equipment and system setup
LIFE OP3 UNI FAQs
What gate is LIFE OP3 UNI suitable for?
LIFE OP3 UNI should be selected according to gate leaf length (Up to 3 m), hinge position, opening angle, wind loading, gate construction and expected daily usage. Published capacities assume a correctly aligned, freely moving gate and suitable installation geometry.
What power supply and control system does LIFE OP3 UNI use?
The researched configuration uses 230V AC. The exact board, transformer and accessory wiring should always be confirmed against the supplied product revision before installation.
What is included with the LIFE OP3 UNI kit?
Researched complete-kit configurations commonly include 2 x LIFE OP3 UNI 230V swing gate motors, 1 x LIFE GE UNI RS DL control unit with integrated receiver, 2 x LIFE MAXI2 433.92 MHz rolling-code remote controls, 1 x Pair of LIFE VISIO outdoor safety photocells. Exact kit contents can vary by market, distributor and product revision, so the final supplied package should be confirmed on the quotation or order.
Can LIFE OP3 UNI be opened manually during a power failure?
Yes, the researched LIFE automation configuration provides a manual or emergency release arrangement. The release method differs by operator type, so the installer should demonstrate the correct procedure after commissioning.
Can LIFE OP3 UNI work with photocells, remotes, GSM or access control?
Yes, when connected through the compatible LIFE control system, the operator can be integrated with supported remote receivers, safety photocells, flashing lights, push buttons and access-control devices such as GSM controllers, keypads or intercom relays. Compatibility must be checked before wiring.
Is professional installation available for LIFE OP3 UNI in the United Arab Emirates?
Professional installation, setup, programming and testing can be arranged subject to product availability, project requirements and location. Correct bracket geometry, gate condition, safety-device positioning and final force/travel settings are important for reliable operation.
Need Help with LIFE OP3 UNI?
For product selection, provide the gate leaf length, approximate gate weight, number of leaves, pillar and hinge dimensions, required opening angle, expected daily usage and clear photographs of the entrance. This information helps confirm whether LIFE OP3 UNI is suitable and which control, safety and access-control accessories should be included.
