KEY SUB44WR Remote Control – Detailed Product Introduction
The KEY SUB44WR Remote Control is a Italian-engineered gate remote control designed for handheld wireless control for compatible automatic entrance systems in the United Arab Emirates. The KEY SUB44WR model belongs to the KEY automation range and is intended for users who need dependable access to an existing supported receiver or automation control board. It can serve villas, residential compounds, commercial buildings, managed parking entrances and other facilities where the installed receiver supports this exact model.
Choosing the correct KEY SUB44WR is especially important when replacing a lost transmitter, adding a user, or maintaining multiple access points. Remote controls that look alike may use different radio frequencies, coding protocols, or receiver generations, so identical housing or matching brand names do not guarantee compatibility. Confirm the receiver model, frequency and programming procedure before ordering. For receiver products, wiring, power input and supported transmitter memory must also match the control system.
In Dubai, Sharjah, Abu Dhabi and across the UAE, the KEY SUB44WR Remote Control may be used as part of an existing gate, barrier or garage-door automation installation after compatibility checks. Programming may require access to a receiver learning button, control-board menu, authorized master transmitter, or professional technician; the procedure depends on the specific installed equipment. This listing focuses on the KEY SUB44WR product rather than promising universal compatibility.
KEY SUB44WR Features
- Model-specific KEY remote transmitter for supported automation systems
- Intended for wireless entrance access when paired with a compatible receiver or control board
- Suitable for adding or replacing an access device subject to compatibility and programming
- Applicable to residential or commercial vehicle access systems where supported
- Compact automation accessory intended for everyday operational convenience
KEY SUB44WR Technical Specifications
- Product: KEY SUB44WR Remote Control
- Model / reference: KEY SUB44WR
- Brand: KEY
- Product category: Gate Remote Control
- Compatibility: confirm the precise existing receiver/control board and coding protocol
- Radio frequency: verify the exact variant against the product label or manufacturer datasheet
- Programming: procedure depends on the receiver / automation controller
- Exported product details: frequency 433.92 MHz
- Exported product details: channels 4
- Exported product details: Rolling Code
- Exported product details: battery CR2032
KEY SUB44WR Kit Includes
- 1 × KEY SUB44WR Remote Control (quantity and accessories subject to the actual SKU/package)
KEY SUB44WR Applications
- Villas and private residential automatic gates
- Apartment and residential-complex access entrances
- Commercial building and office parking entries
- Warehouse and industrial site access where receiver compatibility is confirmed
- Garage door, sliding gate, swing gate or barrier automation only if supported by the installed radio system
Why Choose KEY SUB44WR?
- Dedicated KEY SUB44WR model identification helps order the intended replacement or additional access unit
- KEY range alignment supports clear receiver and transmitter compatibility checks
- Practical option for controlled property access when correctly paired and programmed
- Appropriate for UAE residential and commercial maintenance and upgrade projects
KEY SUB44WR Remote Control Supply & Programming Services in UAE
We supply KEY gate remote controls and related automation accessories across Dubai, Sharjah, Abu Dhabi, Ajman, Al Ain, Ras Al Khaimah, Fujairah and Umm Al Quwain. Our team can help identify the required KEY SUB44WR variant, check transmitter/receiver compatibility, and arrange programming, setup or receiver replacement where supported. Programming and site-service charges depend on the equipment and location; contact us for availability and a quotation.
KEY SUB44WR FAQs
Will the KEY SUB44WR work with any gate motor?
No. The KEY SUB44WR must match the installed receiver, operating frequency and coding system. Confirm compatibility before purchase.
Can this model replace an older remote?
Possibly, provided the receiver supports the KEY SUB44WR and the required programming method. Check the original transmitter and receiver reference.
Can this remote be programmed on site in the UAE?
Yes, where the receiver allows enrolment and access permissions are available. Contact us with the receiver and current remote details.
What is supplied with this product?
The listed unit or set is supplied according to the actual selected SKU. Additional receivers, batteries, mounting accessories or installation are not included unless specifically stated in the order.
Why Choose Us?
We focus on automatic gate motors, garage door systems, parking barriers, access-control accessories and remote-control programming throughout the UAE. Our team can assist with product identification, compatibility advice, supply and professional programming or installation services for supported systems. We aim to recommend the correct part for your existing automation setup rather than a remote selected by appearance alone.
KEY SUB44WR Original Product Information
KEY SUB44WR Remote Control – Italian KEY Automation engineering for Automatic Gate Access
The KEY SUB44WR is a remote control transmitter designed for compatible KEY access systems. It can provide convenient wireless operation for automatic sliding gates, swing gates, garage doors and parking barriers where receiver compatibility is confirmed. Suitable for replacement or additional-user requirements across the United Arab Emirates. Key technical details include channels 4, frequency 433.92 MHz, coding XR Rolling Code, battery CR2032 3V. For reliable operation, the transmitter frequency, coding system and receiver family should always match the installed automation.
KEY SUB44WR Features
- 4-channel KEY Automation transmitter
- 433.92 MHz XR rolling-code technology
- IP67 weather-resistant protection
- Compact white housing
- CR2032 lithium battery
- Designed for compatible KEY receivers
KEY SUB44WR Technical Specifications
- Brand: KEY Automation
- Model: SUB44WR
- Channels: 4
- Frequency: 433.92 MHz
- Coding: XR Rolling Code
- Protection Rating: IP67
- Battery: CR2032 3V
- Weight: Approx. 0.036 kg
KEY SUB44WR Kit Includes
- 1 × KEY SUB44WR remote control
- 1 × CR2032 3V battery
KEY SUB44WR Applications
- Automatic sliding gates
- Automatic swing gates
- Garage door openers
- Parking gate barriers
- Residential and commercial access automation
KEY SUB44WR Compatibility & Programming
Compatibility: Designed for compatible KEY Automation XR radio receivers. Verify receiver series before programming.
Programming: Program the transmitter into the compatible KEY Automation receiver according to the receiver/control-board procedure.
Why Choose KEY SUB44WR?
- Model-specific solution for compatible KEY radio systems
- Useful as a replacement or additional access-control component when compatibility is confirmed
- Designed for convenient wireless gate, garage or barrier operation
- Technical specifications and programming requirements researched for easier product selection
Why Choose Sliding Gate Motor UAE?
- Gate automation products and accessories supplied across the United Arab Emirates
- Compatibility assistance for remote controls, receivers and gate control boards
- Programming and technical support available for compatible automation systems
- Products for residential, commercial and industrial access applications
KEY SUB44WR FAQs
What frequency does KEY SUB44WR use?
KEY SUB44WR operates on 433.92 MHz. It uses XR Rolling Code coding.
Is KEY SUB44WR compatible with my gate motor?
Designed for compatible KEY Automation XR radio receivers. Verify receiver series before programming.
How do I program KEY SUB44WR?
Program the transmitter into the compatible KEY Automation receiver according to the receiver/control-board procedure.
What battery does KEY SUB44WR use?
The listed battery is CR2032 3V.
Can KEY SUB44WR be used as an additional remote?
Yes, provided the installed receiver has available memory and the transmitter frequency/coding are compatible. It must be programmed using the correct receiver procedure.
