NICE INTI2G Remote Control – Detailed Product Introduction
The NICE INTI2G Remote Control is a Italian-engineered gate remote control designed for handheld wireless control for compatible automatic entrance systems in the United Arab Emirates. The NICE INTI2G model belongs to the NICE automation range and is intended for users who need dependable access to an existing supported receiver or automation control board. It can serve villas, residential compounds, commercial buildings, managed parking entrances and other facilities where the installed receiver supports this exact model.
Choosing the correct NICE INTI2G is especially important when replacing a lost transmitter, adding a user, or maintaining multiple access points. Remote controls that look alike may use different radio frequencies, coding protocols, or receiver generations, so identical housing or matching brand names do not guarantee compatibility. Confirm the receiver model, frequency and programming procedure before ordering. For receiver products, wiring, power input and supported transmitter memory must also match the control system.
In Dubai, Sharjah, Abu Dhabi and across the UAE, the NICE INTI2G Remote Control may be used as part of an existing gate, barrier or garage-door automation installation after compatibility checks. Programming may require access to a receiver learning button, control-board menu, authorized master transmitter, or professional technician; the procedure depends on the specific installed equipment. This listing focuses on the NICE INTI2G product rather than promising universal compatibility.
NICE INTI2G Features
- Model-specific NICE remote transmitter for supported automation systems
- Intended for wireless entrance access when paired with a compatible receiver or control board
- Suitable for adding or replacing an access device subject to compatibility and programming
- Applicable to residential or commercial vehicle access systems where supported
- Compact automation accessory intended for everyday operational convenience
NICE INTI2G Technical Specifications
- Product: NICE INTI2G Remote Control
- Model / reference: NICE INTI2G
- Brand: NICE
- Product category: Gate Remote Control
- Compatibility: confirm the precise existing receiver/control board and coding protocol
- Radio frequency: verify the exact variant against the product label or manufacturer datasheet
- Programming: procedure depends on the receiver / automation controller
- Exported product details: frequency 433.92 MHz
- Exported product details: channels 2
- Exported product details: O-Code
- Exported product details: battery CR2032
NICE INTI2G Kit Includes
- 1 × NICE INTI2G Remote Control (quantity and accessories subject to the actual SKU/package)
NICE INTI2G Applications
- Villas and private residential automatic gates
- Apartment and residential-complex access entrances
- Commercial building and office parking entries
- Warehouse and industrial site access where receiver compatibility is confirmed
- Garage door, sliding gate, swing gate or barrier automation only if supported by the installed radio system
Why Choose NICE INTI2G?
- Dedicated NICE INTI2G model identification helps order the intended replacement or additional access unit
- NICE range alignment supports clear receiver and transmitter compatibility checks
- Practical option for controlled property access when correctly paired and programmed
- Appropriate for UAE residential and commercial maintenance and upgrade projects
NICE INTI2G Remote Control Supply & Programming Services in UAE
We supply NICE gate remote controls and related automation accessories across Dubai, Sharjah, Abu Dhabi, Ajman, Al Ain, Ras Al Khaimah, Fujairah and Umm Al Quwain. Our team can help identify the required NICE INTI2G variant, check transmitter/receiver compatibility, and arrange programming, setup or receiver replacement where supported. Programming and site-service charges depend on the equipment and location; contact us for availability and a quotation.
NICE INTI2G FAQs
Will the NICE INTI2G work with any gate motor?
No. The NICE INTI2G must match the installed receiver, operating frequency and coding system. Confirm compatibility before purchase.
Can this model replace an older remote?
Possibly, provided the receiver supports the NICE INTI2G and the required programming method. Check the original transmitter and receiver reference.
Can this remote be programmed on site in the UAE?
Yes, where the receiver allows enrolment and access permissions are available. Contact us with the receiver and current remote details.
What is supplied with this product?
The listed unit or set is supplied according to the actual selected SKU. Additional receivers, batteries, mounting accessories or installation are not included unless specifically stated in the order.
Why Choose Us?
We focus on automatic gate motors, garage door systems, parking barriers, access-control accessories and remote-control programming throughout the UAE. Our team can assist with product identification, compatibility advice, supply and professional programming or installation services for supported systems. We aim to recommend the correct part for your existing automation setup rather than a remote selected by appearance alone.
NICE INTI2G Original Product Information
NICE INTI2G Remote Control – Italian NICE automation engineering for Automatic Gate Access
The NICE INTI2G is a remote control transmitter designed for compatible NICE access systems. It can provide convenient wireless operation for automatic sliding gates, swing gates, garage doors and parking barriers where receiver compatibility is confirmed. Suitable for replacement or additional-user requirements across the United Arab Emirates. Key technical details include channels 2, frequency 433.92 MHz, coding 72-bit O-Code Rolling Code / FloR compatible, battery CR2032 3V. For reliable operation, the transmitter frequency, coding system and receiver family should always match the installed automation.
NICE INTI2G Features
- Miniature 2-channel NICE Era Inti transmitter
- 433.92 MHz O-Code rolling-code technology
- FloR receiver compatibility where supported
- Compact lightweight body
- CR2032 lithium battery
- Suitable as replacement or additional NICE transmitter
NICE INTI2G Technical Specifications
- Brand: NICE
- Model: INTI2G
- Channels: 2
- Frequency: 433.92 MHz
- Coding: 72-bit O-Code Rolling Code / FloR compatible
- Battery: CR2032 3V
- Estimated Range: Approx. 150–200 m in open space with tuned antenna
- Dimensions: 45 × 56 × 11 mm
- Weight: Approx. 14 g
- Colour: Green
NICE INTI2G Kit Includes
- 1 × NICE INTI2G remote control
- 1 × compatible battery (normally supplied/pre-installed)
NICE INTI2G Applications
- Automatic sliding gates
- Automatic swing gates
- Garage door openers
- Parking gate barriers
- Residential and commercial access automation
NICE INTI2G Compatibility & Programming
Compatibility: Confirm the installed NICE receiver family and coding system. NICE transmitters using the same 433.92 MHz frequency can still use different radio protocols.
Programming: Memorise the transmitter through the compatible NICE receiver/control board, or use supported remote-to-remote procedures where permitted by the receiver.
Why Choose NICE INTI2G?
- Model-specific solution for compatible NICE radio systems
- Useful as a replacement or additional access-control component when compatibility is confirmed
- Designed for convenient wireless gate, garage or barrier operation
- Technical specifications and programming requirements researched for easier product selection
Why Choose Sliding Gate Motor UAE?
- Gate automation products and accessories supplied across the United Arab Emirates
- Compatibility assistance for remote controls, receivers and gate control boards
- Programming and technical support available for compatible automation systems
- Products for residential, commercial and industrial access applications
NICE INTI2G FAQs
What frequency does NICE INTI2G use?
NICE INTI2G operates on 433.92 MHz. It uses 72-bit O-Code Rolling Code / FloR compatible coding.
Is NICE INTI2G compatible with my gate motor?
Confirm the installed NICE receiver family and coding system. NICE transmitters using the same 433.92 MHz frequency can still use different radio protocols.
How do I program NICE INTI2G?
Memorise the transmitter through the compatible NICE receiver/control board, or use supported remote-to-remote procedures where permitted by the receiver.
What battery does NICE INTI2G use?
The listed battery is CR2032 3V.
Can NICE INTI2G be used as an additional remote?
Yes, provided the installed receiver has available memory and the transmitter frequency/coding are compatible. It must be programmed using the correct receiver procedure.
Compatibility referencesCompatible & Related Models Mentioned for This Product
These links are created only from model references already stated in this product description. Confirm the exact model revision, voltage and receiver/control-board version before ordering.
