FAAC XF 433 Remote Control Receiver – Detailed Product Introduction
The FAAC XF 433 Remote Control Receiver is a Italian-engineered gate remote control receiver designed for wireless receiving interface for compatible automated gate and garage-door control systems in the United Arab Emirates. The FAAC XF 433 model belongs to the FAAC automation range and is intended for users who need dependable access to an existing supported receiver or automation control board. It can serve villas, residential compounds, commercial buildings, managed parking entrances and other facilities where the installed receiver supports this exact model.
Choosing the correct FAAC XF 433 is especially important when replacing a lost transmitter, adding a user, or maintaining multiple access points. Remote controls that look alike may use different radio frequencies, coding protocols, or receiver generations, so identical housing or matching brand names do not guarantee compatibility. Confirm the receiver model, frequency and programming procedure before ordering. For receiver products, wiring, power input and supported transmitter memory must also match the control system.
In Dubai, Sharjah, Abu Dhabi and across the UAE, the FAAC XF 433 Remote Control Receiver may be used as part of an existing gate, barrier or garage-door automation installation after compatibility checks. Programming may require access to a receiver learning button, control-board menu, authorized master transmitter, or professional technician; the procedure depends on the specific installed equipment. This listing focuses on the FAAC XF 433 product rather than promising universal compatibility.
FAAC XF 433 Features
- Model-specific FAAC radio receiver for supported automation systems
- Intended for wireless entrance access when paired with a compatible receiver or control board
- Suitable for adding or replacing an access device subject to compatibility and programming
- Applicable to residential or commercial vehicle access systems where supported
- Receiver solution for integrating compatible transmitters with automation equipment
FAAC XF 433 Technical Specifications
- Product: FAAC XF 433 Remote Control Receiver
- Model / reference: FAAC XF 433
- Brand: FAAC
- Product category: Gate Remote Control Receiver
- Compatibility: confirm the precise existing receiver/control board and coding protocol
- Radio frequency: verify the exact variant against the product label or manufacturer datasheet
- Programming: procedure depends on the receiver / automation controller
- Exported product details: frequency 433.92 MHz
- Exported product details: rolling-code
FAAC XF 433 Kit Includes
- 1 × FAAC XF 433 Remote Control Receiver (receiver unit; other accessories only if listed by the supplier)
FAAC XF 433 Applications
- Villas and private residential automatic gates
- Apartment and residential-complex access entrances
- Commercial building and office parking entries
- Warehouse and industrial site access where receiver compatibility is confirmed
- Garage door, sliding gate, swing gate or barrier automation only if supported by the installed radio system
Why Choose FAAC XF 433?
- Dedicated FAAC XF 433 model identification helps order the intended replacement or additional access unit
- FAAC range alignment supports clear receiver and transmitter compatibility checks
- Practical option for controlled property access when correctly paired and programmed
- Appropriate for UAE residential and commercial maintenance and upgrade projects
FAAC XF 433 Remote Control Receiver Supply & Programming Services in UAE
We supply FAAC gate remote controls and related automation accessories across Dubai, Sharjah, Abu Dhabi, Ajman, Al Ain, Ras Al Khaimah, Fujairah and Umm Al Quwain. Our team can help identify the required FAAC XF 433 variant, check transmitter/receiver compatibility, and arrange programming, setup or receiver replacement where supported. Programming and site-service charges depend on the equipment and location; contact us for availability and a quotation.
FAAC XF 433 FAQs
Will the FAAC XF 433 work with any gate motor?
No. The FAAC XF 433 must match the installed receiver, operating frequency and coding system. Confirm compatibility before purchase.
Can this model replace an older remote?
Possibly, provided the receiver supports the FAAC XF 433 and the required programming method. Check the original transmitter and receiver reference.
Can this receiver be installed on an existing system?
Programming support may be available after the existing hardware is identified. Receiver installation must also meet controller wiring and power requirements.
What is supplied with this product?
The listed unit or set is supplied according to the actual selected SKU. Additional receivers, batteries, mounting accessories or installation are not included unless specifically stated in the order.
Why Choose Us?
We focus on automatic gate motors, garage door systems, parking barriers, access-control accessories and remote-control programming throughout the UAE. Our team can assist with product identification, compatibility advice, supply and professional programming or installation services for supported systems. We aim to recommend the correct part for your existing automation setup rather than a remote selected by appearance alone.
FAAC XF 433 Original Product Information
FAAC XF 433 Remote Control Receiver – Italian FAAC automation engineering for Reliable Gate Access
The FAAC XF 433 is a gate automation radio receiver designed for compatible FAAC systems. It provides a practical way to manage compatible remote-control access for sliding gates, swing gates, garage automation and parking barriers in the United Arab Emirates. Key technical details include frequency 433.92 MHz. Correct receiver, frequency, coding and control-board compatibility should be confirmed before replacement or installation.
FAAC XF 433 Features
- FAAC 433.92 MHz radio receiver module
- Designed for compatible FAAC RC rolling-code transmitters
- Plug-in receiver format
- Supports gate and barrier radio-control integration
- Italian FAAC automation engineering
FAAC XF 433 Technical Specifications
- Brand: FAAC
- Model: XF 433
- Product Type: Radio Receiver Module
- Frequency: 433.92 MHz
- Radio Technology: FAAC RC Rolling Code
- Receiver Channels: Up to 4 radio commands depending on compatible system/module configuration
- FAAC Item Code: 787831 as listed in existing product data
FAAC XF 433 Kit Includes
- 1 × FAAC XF 433 radio receiver module
- Manufacturer packaging / documentation where supplied
FAAC XF 433 Applications
- FAAC sliding gate motors
- FAAC swing gate motors
- FAAC parking barriers
- FAAC garage/access systems
- Radio receiver replacement or upgrade
FAAC XF 433 Compatibility & Programming
Compatibility: Use with compatible FAAC control boards and FAAC RC 433.92 MHz transmitters. Check connector/control-board compatibility before installation.
Programming: Transmitters are memorised through the compatible FAAC control board/receiver programming procedure.
Why Choose FAAC XF 433?
- Model-specific solution for compatible FAAC radio systems
- Useful as a replacement or additional access-control component when compatibility is confirmed
- Designed for convenient wireless gate, garage or barrier operation
- Technical specifications and programming requirements researched for easier product selection
Why Choose Sliding Gate Motor UAE?
- Gate automation products and accessories supplied across the United Arab Emirates
- Compatibility assistance for remote controls, receivers and gate control boards
- Programming and technical support available for compatible automation systems
- Products for residential, commercial and industrial access applications
FAAC XF 433 FAQs
What transmitters are compatible with FAAC XF 433?
Use with compatible FAAC control boards and FAAC RC 433.92 MHz transmitters. Check connector/control-board compatibility before installation.
How is FAAC XF 433 programmed?
Transmitters are memorised through the compatible FAAC control board/receiver programming procedure.
How many channels does FAAC XF 433 support?
The listed configuration is model-dependent. Confirm the exact receiver suffix/version before replacement.
Can FAAC XF 433 replace an older gate receiver?
It may be suitable where the control-board connection, supply voltage, frequency and radio coding are compatible. The installed system should be checked before installation.
