DEA GT4 Remote Control – Detailed Product Introduction
The DEA GT4 Remote Control is a Italian-engineered gate remote control designed for handheld wireless control for compatible automatic entrance systems in the United Arab Emirates. The DEA GT4 model belongs to the DEA automation range and is intended for users who need dependable access to an existing supported receiver or automation control board. It can serve villas, residential compounds, commercial buildings, managed parking entrances and other facilities where the installed receiver supports this exact model.
Choosing the correct DEA GT4 is especially important when replacing a lost transmitter, adding a user, or maintaining multiple access points. Remote controls that look alike may use different radio frequencies, coding protocols, or receiver generations, so identical housing or matching brand names do not guarantee compatibility. Confirm the receiver model, frequency and programming procedure before ordering. For receiver products, wiring, power input and supported transmitter memory must also match the control system.
In Dubai, Sharjah, Abu Dhabi and across the UAE, the DEA GT4 Remote Control may be used as part of an existing gate, barrier or garage-door automation installation after compatibility checks. Programming may require access to a receiver learning button, control-board menu, authorized master transmitter, or professional technician; the procedure depends on the specific installed equipment. This listing focuses on the DEA GT4 product rather than promising universal compatibility.
DEA GT4 Features
- Model-specific DEA remote transmitter for supported automation systems
- Intended for wireless entrance access when paired with a compatible receiver or control board
- Suitable for adding or replacing an access device subject to compatibility and programming
- Applicable to residential or commercial vehicle access systems where supported
- Compact automation accessory intended for everyday operational convenience
DEA GT4 Technical Specifications
- Product: DEA GT4 Remote Control
- Model / reference: DEA GT4
- Brand: DEA
- Product category: Gate Remote Control
- Compatibility: confirm the precise existing receiver/control board and coding protocol
- Radio frequency: verify the exact variant against the product label or manufacturer datasheet
- Programming: procedure depends on the receiver / automation controller
- Exported product details: frequency 868 MHz
- Exported product details: channels 4
- Exported product details: Rolling Code
- Exported product details: battery 12V
DEA GT4 Kit Includes
- 1 × DEA GT4 Remote Control (quantity and accessories subject to the actual SKU/package)
DEA GT4 Applications
- Villas and private residential automatic gates
- Apartment and residential-complex access entrances
- Commercial building and office parking entries
- Warehouse and industrial site access where receiver compatibility is confirmed
- Garage door, sliding gate, swing gate or barrier automation only if supported by the installed radio system
Why Choose DEA GT4?
- Dedicated DEA GT4 model identification helps order the intended replacement or additional access unit
- DEA range alignment supports clear receiver and transmitter compatibility checks
- Practical option for controlled property access when correctly paired and programmed
- Appropriate for UAE residential and commercial maintenance and upgrade projects
DEA GT4 Remote Control Supply & Programming Services in UAE
We supply DEA gate remote controls and related automation accessories across Dubai, Sharjah, Abu Dhabi, Ajman, Al Ain, Ras Al Khaimah, Fujairah and Umm Al Quwain. Our team can help identify the required DEA GT4 variant, check transmitter/receiver compatibility, and arrange programming, setup or receiver replacement where supported. Programming and site-service charges depend on the equipment and location; contact us for availability and a quotation.
DEA GT4 FAQs
Will the DEA GT4 work with any gate motor?
No. The DEA GT4 must match the installed receiver, operating frequency and coding system. Confirm compatibility before purchase.
Can this model replace an older remote?
Possibly, provided the receiver supports the DEA GT4 and the required programming method. Check the original transmitter and receiver reference.
Can this remote be programmed on site in the UAE?
Yes, where the receiver allows enrolment and access permissions are available. Contact us with the receiver and current remote details.
What is supplied with this product?
The listed unit or set is supplied according to the actual selected SKU. Additional receivers, batteries, mounting accessories or installation are not included unless specifically stated in the order.
Why Choose Us?
We focus on automatic gate motors, garage door systems, parking barriers, access-control accessories and remote-control programming throughout the UAE. Our team can assist with product identification, compatibility advice, supply and professional programming or installation services for supported systems. We aim to recommend the correct part for your existing automation setup rather than a remote selected by appearance alone.
DEA GT4 Original Product Information
DEA GT4 Remote Control – Italian DEA SYSTEM automation engineering for Automatic Gate Access
The DEA GT4 is a remote control transmitter designed for compatible DEA access systems. It can provide convenient wireless operation for automatic sliding gates, swing gates, garage doors and parking barriers where receiver compatibility is confirmed. Suitable for replacement or additional-user requirements across the United Arab Emirates. Key technical details include channels 4, frequency 868 MHz, coding Rolling Code, battery 12V alkaline. For reliable operation, the transmitter frequency, coding system and receiver family should always match the installed automation.
DEA GT4 Features
- 4-channel DEA transmitter
- 868 MHz radio operation
- Rolling Code
- Compact handheld design
- Suitable for compatible DEA gate automation
- Replacement/additional transmitter use
DEA GT4 Technical Specifications
- Brand: DEA SYSTEM
- Model: GT4
- Channels: 4
- Frequency: 868 MHz
- Coding: Rolling Code
- Battery: 12V alkaline
- Typical Range: Approx. 40–120 m
- Colour: White
DEA GT4 Kit Includes
- 1 × DEA GT4 remote control
- 1 × compatible battery
DEA GT4 Applications
- Automatic sliding gates
- Automatic swing gates
- Garage door openers
- Parking gate barriers
- Residential and commercial access automation
DEA GT4 Compatibility & Programming
Compatibility: Use with compatible DEA receiver systems using the same frequency and coding family. Verify the existing transmitter/receiver before programming.
Programming: Program at the compatible DEA receiver/control unit according to the receiver manual. Some newer DEA transmitter families support advanced coded radio protocols.
Why Choose DEA GT4?
- Model-specific solution for compatible DEA radio systems
- Useful as a replacement or additional access-control component when compatibility is confirmed
- Designed for convenient wireless gate, garage or barrier operation
- Technical specifications and programming requirements researched for easier product selection
Why Choose Sliding Gate Motor UAE?
- Gate automation products and accessories supplied across the United Arab Emirates
- Compatibility assistance for remote controls, receivers and gate control boards
- Programming and technical support available for compatible automation systems
- Products for residential, commercial and industrial access applications
DEA GT4 FAQs
What frequency does DEA GT4 use?
DEA GT4 operates on 868 MHz. It uses Rolling Code coding.
Is DEA GT4 compatible with my gate motor?
Use with compatible DEA receiver systems using the same frequency and coding family. Verify the existing transmitter/receiver before programming.
How do I program DEA GT4?
Program at the compatible DEA receiver/control unit according to the receiver manual. Some newer DEA transmitter families support advanced coded radio protocols.
What battery does DEA GT4 use?
The listed battery is 12V alkaline.
Can DEA GT4 be used as an additional remote?
Yes, provided the installed receiver has available memory and the transmitter frequency/coding are compatible. It must be programmed using the correct receiver procedure.
