CENTURION VANTAGE SMART – SMART control for battery-driven swing gates
A 12V DC battery-driven system with a separate Vx SMART controller. Stroke options are 300, 400 and 500 mm, so the exact variant must be matched to the gate.
CENTURION VANTAGE SMART provides automatic opening and closing for a correctly matched swing gate installation. Choose the configuration according to the individual leaf dimensions, hinge position, opening direction and expected number of daily cycles.
Key Features
- Electronic collision sensing
- NOVA code-hopping receiver
- Key manual override
- IP55 protection
Technical Specifications
- Model: CENTURION VANTAGE SMART
- Application: Swing Gate Automation
- Input Voltage: 90V – 240V AC ±10%
- Frequency: 50/60Hz
- Motor Voltage: 12V DC
- Battery System: 7.2Ah Battery Driven
- Battery Charger: 1.8A
- Current Consumption (Mains): 170mA
- Motor Current Consumption: 15A Maximum
- Maximum Push Force: 250kgf
- Actuator Stroke Options: 300mm / 400mm / 500mm
- Piston Speed: 28mm/sec Variable
- Typical Opening Time: 11.3 Seconds
- Manual Override: Key Release
- Maximum Operations Per Day: 250
- Duty Cycle: 50%
- Battery Backup Capacity: 70 Half-Day Cycles / 58 Full-Day Cycles
- Collision Sensing: Electronic
- Operating Temperature: -15°C to +50°C
- Protection Rating: IP55
- Controller Type: Vx SMART in Separate Wallbox
- Receiver Type: NOVA Code-Hopping Multichannel
- Receiver Frequency: 433.92MHz
- Receiver Capacity: 1500 Remotes
Published maximum leaf length and weight are selection limits, not a guarantee that both maxima can be used together. Confirm the exact model revision, permitted load curve and mounting dimensions before installation.
Kit Contents and Supply Configuration
The motor or kit configuration must be confirmed when ordering. A complete installation may require a matched control unit, receiver, remotes, safety devices and mounting hardware. These accessories are not assumed to be included unless itemised in the quotation.
Applications and Product Selection
Use CENTURION VANTAGE SMART for hinged vehicle entrances that fall within its specified dimensions and duty rating. Suitable projects may include private villas, residential compounds and compatible commercial entrances. A site assessment should check wind exposure, gate infill, hinge condition and clear movement space.
Installation, Safety and Access Control
The gate should move freely by hand before fitting the drive. The installer must check bracket or foundation geometry, mechanical stops, cable routes and the required electrical supply, then set travel and force parameters according to the supplied manual.
Remote receivers, photocells, warning lights, intercom relays, keypads and GSM or WiFi interfaces must match the selected controller. Test the safety inputs and manual release, where fitted, before handing over the system. Optional smart or backup equipment should be confirmed for the exact controller version.
Frequently Asked Questions
How do I check whether CENTURION VANTAGE SMART fits my gate?
Compare the technical details above with each leaf’s length, weight and mounting geometry. Also provide gate photographs, hinge measurements and expected daily usage so the correct configuration can be confirmed.
What is supplied with this product?
Request confirmation of the motor quantity and required controller, safety devices and accessories. The final supplied items should be listed on the quotation.
Can it connect to remote or smart access control?
Access devices can be added when their electrical output and radio or communication protocol match the selected control unit. Confirm compatibility before purchasing a WiFi, GSM, intercom or keypad accessory.
Is installation available across the UAE?
Professional installation, setup, programming and testing can be arranged subject to location and project requirements. Contact our team for availability and service charges.
Why Choose Sliding Gate Motor UAE?
Get assistance with model selection, compatible accessories and installation requirements, plus delivery support across Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah, Umm Al Quwain and Al Ain. Send the gate dimensions and site photographs to help our team prepare an appropriate supply configuration.
