CASIT ERTS10DB Remote Control – Detailed Product Introduction
The CASIT ERTS10DB Remote Control is a Italian-engineered gate remote control designed for handheld wireless control for compatible automatic entrance systems in the United Arab Emirates. The CASIT ERTS10DB model belongs to the CASIT automation range and is intended for users who need dependable access to an existing supported receiver or automation control board. It can serve villas, residential compounds, commercial buildings, managed parking entrances and other facilities where the installed receiver supports this exact model.
Choosing the correct CASIT ERTS10DB is especially important when replacing a lost transmitter, adding a user, or maintaining multiple access points. Remote controls that look alike may use different radio frequencies, coding protocols, or receiver generations, so identical housing or matching brand names do not guarantee compatibility. Confirm the receiver model, frequency and programming procedure before ordering. For receiver products, wiring, power input and supported transmitter memory must also match the control system.
In Dubai, Sharjah, Abu Dhabi and across the UAE, the CASIT ERTS10DB Remote Control may be used as part of an existing gate, barrier or garage-door automation installation after compatibility checks. Programming may require access to a receiver learning button, control-board menu, authorized master transmitter, or professional technician; the procedure depends on the specific installed equipment. This listing focuses on the CASIT ERTS10DB product rather than promising universal compatibility.
CASIT ERTS10DB Features
- Model-specific CASIT remote transmitter for supported automation systems
- Intended for wireless entrance access when paired with a compatible receiver or control board
- Suitable for adding or replacing an access device subject to compatibility and programming
- Applicable to residential or commercial vehicle access systems where supported
- Compact automation accessory intended for everyday operational convenience
CASIT ERTS10DB Technical Specifications
- Product: CASIT ERTS10DB Remote Control
- Model / reference: CASIT ERTS10DB
- Brand: CASIT
- Product category: Gate Remote Control
- Compatibility: confirm the precise existing receiver/control board and coding protocol
- Radio frequency: verify the exact variant against the product label or manufacturer datasheet
- Programming: procedure depends on the receiver / automation controller
- Exported product details: frequency 433 MHz
- Exported product details: channels 2
- Exported product details: RTS
- Exported product details: Power Supply: 3V
CASIT ERTS10DB Kit Includes
- 1 × CASIT ERTS10DB Remote Control (quantity and accessories subject to the actual SKU/package)
CASIT ERTS10DB Applications
- Villas and private residential automatic gates
- Apartment and residential-complex access entrances
- Commercial building and office parking entries
- Warehouse and industrial site access where receiver compatibility is confirmed
- Garage door, sliding gate, swing gate or barrier automation only if supported by the installed radio system
Why Choose CASIT ERTS10DB?
- Dedicated CASIT ERTS10DB model identification helps order the intended replacement or additional access unit
- CASIT range alignment supports clear receiver and transmitter compatibility checks
- Practical option for controlled property access when correctly paired and programmed
- Appropriate for UAE residential and commercial maintenance and upgrade projects
CASIT ERTS10DB Remote Control Supply & Programming Services in UAE
We supply CASIT gate remote controls and related automation accessories across Dubai, Sharjah, Abu Dhabi, Ajman, Al Ain, Ras Al Khaimah, Fujairah and Umm Al Quwain. Our team can help identify the required CASIT ERTS10DB variant, check transmitter/receiver compatibility, and arrange programming, setup or receiver replacement where supported. Programming and site-service charges depend on the equipment and location; contact us for availability and a quotation.
CASIT ERTS10DB FAQs
Will the CASIT ERTS10DB work with any gate motor?
No. The CASIT ERTS10DB must match the installed receiver, operating frequency and coding system. Confirm compatibility before purchase.
Can this model replace an older remote?
Possibly, provided the receiver supports the CASIT ERTS10DB and the required programming method. Check the original transmitter and receiver reference.
Can this remote be programmed on site in the UAE?
Yes, where the receiver allows enrolment and access permissions are available. Contact us with the receiver and current remote details.
What is supplied with this product?
The listed unit or set is supplied according to the actual selected SKU. Additional receivers, batteries, mounting accessories or installation are not included unless specifically stated in the order.
Why Choose Us?
We focus on automatic gate motors, garage door systems, parking barriers, access-control accessories and remote-control programming throughout the UAE. Our team can assist with product identification, compatibility advice, supply and professional programming or installation services for supported systems. We aim to recommend the correct part for your existing automation setup rather than a remote selected by appearance alone.
CASIT ERTS10DB Original Product Information
CASIT ERTS10DB Remote Control – Italian CASIT gate automation engineering for Automatic Gate Access
The CASIT ERTS10DB is a remote control transmitter designed for compatible CASIT access systems. It can provide convenient wireless operation for automatic sliding gates, swing gates, garage doors and parking barriers where receiver compatibility is confirmed. Suitable for replacement or additional-user requirements across the United Arab Emirates. Key technical details include channels 2, frequency 433 MHz / 433.92 MHz, coding Fixed Code / DIP Switch, range Approx. 60 m under suitable conditions. For reliable operation, the transmitter frequency, coding system and receiver family should always match the installed automation.
CASIT ERTS10DB Features
- 2-channel S10 transmitter
- 433 MHz / 433.92 MHz fixed-code radio operation
- DIP-switch coding
- Compact Italian CASIT transmitter
- Suitable for compatible CASIT gate receivers
- Simple code matching on compatible systems
CASIT ERTS10DB Technical Specifications
- Brand: CASIT
- Model: ERTS10DB / S10-DB
- Channels: 2
- Frequency: 433 MHz / 433.92 MHz
- Coding: Fixed Code / DIP Switch
- Power Supply: 3V CR2032 lithium battery
- Range: Approx. 60 m under suitable conditions
- Dimensions: Approx. 33 × 69 × 13 mm
- Operating Temperature: Approx. -20°C to +55°C
CASIT ERTS10DB Kit Includes
- 1 × CASIT ERTS10DB remote control
- 1 × CR2032 3V battery
CASIT ERTS10DB Applications
- Automatic sliding gates
- Automatic swing gates
- Garage door openers
- Parking gate barriers
- Residential and commercial access automation
CASIT ERTS10DB Compatibility & Programming
Compatibility: Compatible with selected CASIT S10 / fixed-code receiver systems, including documented CASIT receivers/control units. DIP-switch pattern must match the receiver/system.
Programming: Set the DIP-switch code to match the compatible receiver or existing authorised transmitter pattern.
Why Choose CASIT ERTS10DB?
- Model-specific solution for compatible CASIT radio systems
- Useful as a replacement or additional access-control component when compatibility is confirmed
- Designed for convenient wireless gate, garage or barrier operation
- Technical specifications and programming requirements researched for easier product selection
Why Choose Sliding Gate Motor UAE?
- Gate automation products and accessories supplied across the United Arab Emirates
- Compatibility assistance for remote controls, receivers and gate control boards
- Programming and technical support available for compatible automation systems
- Products for residential, commercial and industrial access applications
CASIT ERTS10DB FAQs
What frequency does CASIT ERTS10DB use?
CASIT ERTS10DB operates on 433 MHz / 433.92 MHz. It uses Fixed Code / DIP Switch coding.
Is CASIT ERTS10DB compatible with my gate motor?
Compatible with selected CASIT S10 / fixed-code receiver systems, including documented CASIT receivers/control units. DIP-switch pattern must match the receiver/system.
How do I program CASIT ERTS10DB?
Set the DIP-switch code to match the compatible receiver or existing authorised transmitter pattern.
What battery does CASIT ERTS10DB use?
Battery type depends on the exact transmitter version. Check the battery fitted to the existing remote or the manufacturer specification.
Can CASIT ERTS10DB be used as an additional remote?
Yes, provided the installed receiver has available memory and the transmitter frequency/coding are compatible. It must be programmed using the correct receiver procedure.
