CAME BXV06AGS – Italian 24V automation for gates up to 600 kg
The BXV06AGS uses a 24V drive and integrated display controller for sliding gates up to 600 kg and 18 m long. Its module-4 pinion, radio decoding and movement management provide a configurable automation platform.
Select CAME BXV06AGS for a sliding gate that falls within the specified weight, length and operating limits. A suitable installation begins with a gate that moves freely on its track, correctly aligned wheels and sufficient space for safe travel.
Key Features
- 24V sliding gate motor
- Suitable for gates up to 600 KG
- Supports gate lengths up to 18 meters
- Integrated programming display
- Built-in radio decoding
- Advanced obstacle detection system
Technical Specifications
- Model: BXV06AGS
- CAME Code: 801MS-0180
- Maximum Gate Weight: 600 KG
- Maximum Gate Length: 18 m
- Pinion Module: 4
- Power Supply: 230V AC 50/60Hz
- Motor Voltage: 24V
- Power Consumption: 270W
- Operating Speed: 12 m/min
- Thrust Force: 600 N
- Protection Rating: IP54
Maximum load, speed, gate length and daily operation figures are individual selection limits. They should not be assumed to apply simultaneously. Confirm the exact product revision and its permitted operating conditions before installation.
Kit Contents and Supply Configuration
- 1 x CAME BXV06AGS 600 KG Sliding Gate Motor
- 1 x Integrated Electronic Control Board with Programming Display
- 1 x Pair of DIR10 Outdoor Photocells
- 1 x Four Channel Rolling Code Remote Control
- 1 x AF43S 433.92 MHz Radio Frequency Card
- 1 x LED Flashing Light
- 1 x 5 Meter Antenna Cable
- 1 x Push Button
- 4 x Nylon Racks
The list describes the referenced package. Confirm the supplied motor, controller, remote quantity and accessories on the quotation, as kit configurations can vary.
Applications and Product Selection
Typical projects include villa driveways, residential compounds and commercial vehicle entrances, provided the gate size and usage match the model rating. Higher-capacity configurations may suit warehouses or industrial entrances after a site assessment. Consider actual gate weight, wind exposure, infill, track condition and the number of operating cycles.
Installation, Safety and Access Control
Professional installation should include a stable motor foundation, correct rack and pinion engagement, cable protection, electrical checks and travel setup. The motor should drive the gate without carrying its weight. Select the rack module and mounting arrangement to match the exact operator.
Compatible photocells, safety edges and warning devices must be connected and tested according to the controller instructions. Obstacle detection supplements the required safety equipment. Receivers, keypads, intercom relays and GSM or WiFi interfaces need compatible electrical inputs and communication protocols.
Frequently Asked Questions
Will CAME BXV06AGS suit my sliding gate?
Compare your gate’s weight, length and expected usage with the specifications above. Provide photographs and details of the track, wheels and existing automation so the correct configuration can be confirmed.
Can the gate be opened during a power cut?
Follow the manual-release procedure supplied with the exact operator. Battery operation requires a supported motor/controller version and the specified battery and charging equipment; check whether these are included.
Are remote controls and gear racks included?
See the kit contents above and confirm the final quantities on your order. Additional rack length or access devices may be needed for the site.
Is installation available in the UAE?
Installation, setup, programming and testing can be arranged subject to location and project requirements. Contact our team to confirm availability and service charges.
Why Choose Sliding Gate Motor UAE?
Get help with motor selection, compatible accessories and installation requirements, plus delivery support across Dubai, Abu Dhabi, Sharjah, Ajman, Al Ain, Ras Al Khaimah, Fujairah and Umm Al Quwain. Send gate dimensions and site photographs so our team can prepare a suitable supply configuration.
