CAME BK 1800 KG Sliding Gate Motor UAE – Product Introduction
The CAME BK 1800 KG is a sliding gate automation solution from CAME, offered for gates in the United Arab Emirates. It is designed to automate the horizontal opening and closing of a compatible sliding gate, replacing manual operation with controlled movement and convenient access. The system can be considered for industrial and high-traffic commercial entrances when the actual gate dimensions, load, track condition, usage frequency and safety requirements suit the selected operator.
For property owners, facilities teams and contractors in Dubai, Sharjah, Abu Dhabi, Ajman, Al Ain, Ras Al Khaimah, Fujairah and Umm Al Quwain, CAME BK 1800 KG can form part of a professionally installed automated entrance. Typical system elements include a motor drive, gear rack and control equipment, with optional remote activation, safety photocells, flashing warnings and approved access-control integrations. The exact compatible accessories and supplied parts depend on the manufacturer version and selected package.
As a Italian-engineered brand product, CAME offers a recognized range of gate automation equipment. This model is identified in the product name with a 1,800 kg gate-weight rating; this is not a substitute for checking the manufacturer’s precise model variant, operating limits and installation manual. For higher-demand settings, duty cycle, thermal limits and sustained operating frequency should be checked before selection.
The correct opening and closing speeds, slowdown behavior and obstruction response depend on the manufacturer specification and commissioning settings. Automation can be paired with suitable remote-control and access-control options where supported. Professional installation should include checking the gate structure and travel limits, setting the motor and rack alignment, programming the controller, testing obstacle detection and safety photocells, and providing operating guidance to the end user.
Important selection guidance: A stated maximum gate weight is not a guarantee of suitability for every gate of that weight. The recommended model depends on gate length, wind exposure, wheel and rail condition, friction, opening frequency and ambient operating conditions. Confirm availability, accessories and official technical limits before ordering.
CAME BK 1800 KG – Italian Gate Automation Overview
The CAME BK 1800 KG is an automatic sliding gate operator for projects in the United Arab Emirates. CAME is an Italian access automation manufacturer with a long-established portfolio of gate, barrier and access control systems. This product is intended for professional sliding-gate automation where motor capacity, gate length, track condition, rack alignment and daily operating demand are correctly matched.
With a referenced maximum gate-weight class of 1,800 kg, the CAME BK 1800 KG is suited to commercial and industrial entrances within its engineering limits. The final motor selection should always consider actual rolling resistance, gate length, wheel and track condition, wind loading, operating frequency and required safety accessories—not gate weight alone.
CAME BK 1800 KG Features
- Designed for sliding gates in the 1,800 kg capacity class, subject to gate condition, length and installation geometry.
- Power supply: 230 V AC.
- Gate movement speed: 10.5 m/min.
- Maximum thrust: Approx. 1150 N.
- Duty rating: 50%.
- Protection rating: IP54.
- Can be integrated with compatible photocells, flashing lights, remote controls and access-control inputs supported by the control system.
- Suitable for professional installation with correctly aligned gear rack, stable foundation and a freely moving gate.
CAME BK 1800 KG Technical Specifications
| Brand | CAME |
| Model | CAME BK 1800 KG |
| Product type | Automatic sliding gate motor / operator |
| Maximum gate weight | 1800 kg |
| Maximum gate length | Up to approx. 20 m on current version |
| Power supply | 230 V AC |
| Motor power | Approx. 480 W on current version |
| Current | Approx. 4.2 A |
| Gate speed | 10.5 m/min |
| Maximum thrust | Approx. 1150 N |
| Duty | 50% |
| Protection | IP54 |
| Operating temperature | Approx. -20°C to +50°C |
Specification check: CAME BK technical values can vary across production generations. Confirm the exact motor code/nameplate for replacement parts and final engineering calculations.
CAME BK 1800 KG Kit Includes
- 1 x CAME BK 1800 KG Sliding Gate Motor
- 1 x Integrated Control Unit
- 2 x CAME Remote Controls
- 1 x Pair of Outdoor Safety Photocells
- 1 x Radio Receiver / Frequency Card
- 1 x Flashing / Blinker Light
- 4 x Nylon Gear Racks – 1 Meter Each
- 1 x Push Button
CAME BK 1800 KG Applications
- Commercial and heavy residential sliding gates
- Warehouses, factories and industrial compounds
- Logistics yards and controlled staff or delivery entrances
- High-use sites where operator duty cycle and gate condition are correctly matched
CAME BK 1800 KG Supply & Installation Services in UAE
The CAME BK 1800 KG should be installed on a structurally sound sliding gate that moves freely by hand. Correct motor foundation, pinion/rack alignment, electrical protection and limit setup are essential for reliable operation. Depending on the installed control unit, the system can be combined with compatible remote controls, photocells, flashing warning lights, GSM gate openers, keypads, RFID/access-control devices and other dry-contact control accessories.
Compatible Gate Automation Accessories
- Compatible gate remote controls and radio receiver modules
- Photocells and safety sensors
- Flashing / warning lights
- GSM gate openers and compatible access-control relay devices
- Correct gear rack and mounting accessories for the motor pinion
- Control boards, spare parts and backup-power accessories where supported by the exact model
Why Choose CAME BK 1800 KG?
- Italian Gate Automation Engineering with a product platform developed specifically for automatic sliding-gate control.
- A 1,800 kg class rating gives a clear application range when the gate is correctly sized and maintained.
- IP54 protection class on the referenced configuration supports properly installed outdoor automation.
- A strong option for replacement or new projects when the exact gate weight, length, rack, duty cycle and site conditions are verified.
Why Choose CAME BK 1800 KG?
CAME BK 1800 KG can support convenient vehicle access, controlled gate movement and integration with suitable entrance safety components. Its best advantage is achieved when the specified operator capacity and controller functions suit the site, with the installation correctly aligned and tested. For UAE projects, this helps create an accessible automated entrance for property owners, residents, employees and approved visitors.
Why Choose Us – Sliding Gate Motor UAE
- Gate automation products for residential, commercial and industrial applications.
- Product-selection assistance based on gate size, weight, usage and control requirements.
- Professional installation, setup, programming and testing services subject to availability.
- Compatible remote controls, photocells, control boards, GSM openers and spare parts support.
- Delivery and project support across the United Arab Emirates.
- After-sales technical assistance for compatible gate automation products.
CAME BK 1800 KG FAQs
What gate weight can the CAME BK 1800 KG automate?
The referenced maximum gate-weight class is 1,800 kg. This is a maximum product rating, not a guarantee for every 1,800 kg gate. Gate length, wheel/track condition, rolling resistance, duty cycle and site conditions must also be checked.
What power supply does the CAME BK 1800 KG use?
The referenced configuration uses 230 V AC. Always confirm the exact product code and local wiring requirements before installation.
Can the CAME BK 1800 KG work with photocells, remote controls and a GSM gate opener?
Usually yes when the compatible control board provides the required safety, radio and dry-contact inputs. Photocells, receivers, remotes and GSM/access-control devices must be matched to the controller and correctly programmed.
Is the CAME BK 1800 KG suitable for use in the United Arab Emirates?
It is designed for automatic gate applications and can be used in UAE projects when installed within the manufacturer's environmental limits, with suitable weather protection, electrical protection and regular maintenance. Referenced specifications include IP54 and Approx. -20°C to +50°C.
Do you provide installation and programming for the CAME BK 1800 KG?
Sliding Gate Motor UAE can assist with product selection and can provide professional installation, setup, programming and testing services in the United Arab Emirates, subject to product and location availability.
Product selection note: Maximum gate-weight ratings are manufacturer limits under defined conditions. For reliable long-term operation, confirm gate length, wheel and track condition, rack alignment, opening frequency, wind/loading and safety requirements before final motor selection.
