CAME ATI A5000 – Italian engineering for long-leaf gate automation
A 230V irreversible actuator for leaves up to 5 m and a published maximum weight of 400 kg. Its longer travel suits larger entrances following assessment of weight and hinge geometry.
CAME ATI A5000 provides automatic opening and closing for a correctly matched swing gate installation. Choose the configuration according to the individual leaf dimensions, hinge position, opening direction and expected number of daily cycles.
Key Features
- 260 W motor
- 30–40 second 90° opening
- IP44 protection
- 150°C thermal protection
Technical Specifications
- Model: ATI A5000
- Motor Voltage: 230V AC 50/60Hz
- Current Absorption: 1.2A
- Power Consumption: 260W
- Opening Time at 90°: 30–40 Seconds
- Duty Cycle: 15 Cycles Per Hour
- Thrust Force: 400–4000 N
- Operating Temperature: -20°C to +55°C
- Motor Thermal Protection: 150°C
- Protection Rating: IP44
- Maximum Gate Leaf Length: 5 m
- Maximum Gate Weight: 400 KG
Published maximum leaf length and weight are selection limits, not a guarantee that both maxima can be used together. Confirm the exact model revision, permitted load curve and mounting dimensions before installation.
Kit Contents and Supply Configuration
- 2 x CAME ATI A5000 Swing Gate Motors
- 1 x Multifunction Control Panel for Two Swing Leaves
- 2 x CAME TOP 432EE Remote Controls
- 1 x CAME KIARO Flashing Light
- 1 x Pair of CAME DELTA DIR Photocell Sensors
- 2 x Wall Fixing Brackets
- 1 x Push Button
The listed package reflects the referenced kit configuration. Confirm the exact motor quantity, controller, receiver and accessories on the quotation before ordering.
Applications and Product Selection
Use CAME ATI A5000 for hinged vehicle entrances that fall within its specified dimensions and duty rating. Suitable projects may include private villas, residential compounds and compatible commercial entrances. A site assessment should check wind exposure, gate infill, hinge condition and clear movement space.
Installation, Safety and Access Control
The gate should move freely by hand before fitting the drive. The installer must check bracket or foundation geometry, mechanical stops, cable routes and the required electrical supply, then set travel and force parameters according to the supplied manual.
Remote receivers, photocells, warning lights, intercom relays, keypads and GSM or WiFi interfaces must match the selected controller. Test the safety inputs and manual release, where fitted, before handing over the system. Optional smart or backup equipment should be confirmed for the exact controller version.
Frequently Asked Questions
How do I check whether CAME ATI A5000 fits my gate?
Compare the technical details above with each leaf’s length, weight and mounting geometry. Also provide gate photographs, hinge measurements and expected daily usage so the correct configuration can be confirmed.
What is supplied with this product?
See the kit list above. Final contents should be confirmed on the order because controller and accessory packages can vary.
Can it connect to remote or smart access control?
Access devices can be added when their electrical output and radio or communication protocol match the selected control unit. Confirm compatibility before purchasing a WiFi, GSM, intercom or keypad accessory.
Is installation available across the UAE?
Professional installation, setup, programming and testing can be arranged subject to location and project requirements. Contact our team for availability and service charges.
Why Choose Sliding Gate Motor UAE?
Get assistance with model selection, compatible accessories and installation requirements, plus delivery support across Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah, Umm Al Quwain and Al Ain. Send the gate dimensions and site photographs to help our team prepare an appropriate supply configuration.
