BENINCA TO GO 2AK Remote Control – Detailed Product Introduction
The BENINCA TO GO 2AK Remote Control is a Italian-engineered gate remote control designed for handheld wireless control for compatible automatic entrance systems in the United Arab Emirates. The BENINCA TO GO 2AK model belongs to the BENINCA automation range and is intended for users who need dependable access to an existing supported receiver or automation control board. It can serve villas, residential compounds, commercial buildings, managed parking entrances and other facilities where the installed receiver supports this exact model.
Choosing the correct BENINCA TO GO 2AK is especially important when replacing a lost transmitter, adding a user, or maintaining multiple access points. Remote controls that look alike may use different radio frequencies, coding protocols, or receiver generations, so identical housing or matching brand names do not guarantee compatibility. Confirm the receiver model, frequency and programming procedure before ordering. For receiver products, wiring, power input and supported transmitter memory must also match the control system.
In Dubai, Sharjah, Abu Dhabi and across the UAE, the BENINCA TO GO 2AK Remote Control may be used as part of an existing gate, barrier or garage-door automation installation after compatibility checks. Programming may require access to a receiver learning button, control-board menu, authorized master transmitter, or professional technician; the procedure depends on the specific installed equipment. This listing focuses on the BENINCA TO GO 2AK product rather than promising universal compatibility.
BENINCA TO GO 2AK Features
- Model-specific BENINCA remote transmitter for supported automation systems
- Intended for wireless entrance access when paired with a compatible receiver or control board
- Suitable for adding or replacing an access device subject to compatibility and programming
- Applicable to residential or commercial vehicle access systems where supported
- Compact automation accessory intended for everyday operational convenience
BENINCA TO GO 2AK Technical Specifications
- Product: BENINCA TO GO 2AK Remote Control
- Model / reference: BENINCA TO GO 2AK
- Brand: BENINCA
- Product category: Gate Remote Control
- Compatibility: confirm the precise existing receiver/control board and coding protocol
- Radio frequency: verify the exact variant against the product label or manufacturer datasheet
- Programming: procedure depends on the receiver / automation controller
- Exported product details: frequency 433.92 MHz
- Exported product details: channels 2
- Exported product details: Rolling Code
- Exported product details: battery A23
BENINCA TO GO 2AK Kit Includes
- 1 × BENINCA TO GO 2AK Remote Control (quantity and accessories subject to the actual SKU/package)
BENINCA TO GO 2AK Applications
- Villas and private residential automatic gates
- Apartment and residential-complex access entrances
- Commercial building and office parking entries
- Warehouse and industrial site access where receiver compatibility is confirmed
- Garage door, sliding gate, swing gate or barrier automation only if supported by the installed radio system
Why Choose BENINCA TO GO 2AK?
- Dedicated BENINCA TO GO 2AK model identification helps order the intended replacement or additional access unit
- BENINCA range alignment supports clear receiver and transmitter compatibility checks
- Practical option for controlled property access when correctly paired and programmed
- Appropriate for UAE residential and commercial maintenance and upgrade projects
BENINCA TO GO 2AK Remote Control Supply & Programming Services in UAE
We supply BENINCA gate remote controls and related automation accessories across Dubai, Sharjah, Abu Dhabi, Ajman, Al Ain, Ras Al Khaimah, Fujairah and Umm Al Quwain. Our team can help identify the required BENINCA TO GO 2AK variant, check transmitter/receiver compatibility, and arrange programming, setup or receiver replacement where supported. Programming and site-service charges depend on the equipment and location; contact us for availability and a quotation.
BENINCA TO GO 2AK FAQs
Will the BENINCA TO GO 2AK work with any gate motor?
No. The BENINCA TO GO 2AK must match the installed receiver, operating frequency and coding system. Confirm compatibility before purchase.
Can this model replace an older remote?
Possibly, provided the receiver supports the BENINCA TO GO 2AK and the required programming method. Check the original transmitter and receiver reference.
Can this remote be programmed on site in the UAE?
Yes, where the receiver allows enrolment and access permissions are available. Contact us with the receiver and current remote details.
What is supplied with this product?
The listed unit or set is supplied according to the actual selected SKU. Additional receivers, batteries, mounting accessories or installation are not included unless specifically stated in the order.
Why Choose Us?
We focus on automatic gate motors, garage door systems, parking barriers, access-control accessories and remote-control programming throughout the UAE. Our team can assist with product identification, compatibility advice, supply and professional programming or installation services for supported systems. We aim to recommend the correct part for your existing automation setup rather than a remote selected by appearance alone.
BENINCA TO GO 2AK Original Product Information
BENINCA TO GO 2AK Remote Control – Italian BENINCA automation engineering for Automatic Gate Access
The BENINCA TO GO 2AK is a remote control transmitter designed for compatible BENINCA access systems. It can provide convenient wireless operation for automatic sliding gates, swing gates, garage doors and parking barriers where receiver compatibility is confirmed. Suitable for replacement or additional-user requirements across the United Arab Emirates. Key technical details include channels 2, frequency 433.92 MHz, coding 128-bit ARC Rolling Code + Fixed Code mode, battery A23 12V alkaline. For reliable operation, the transmitter frequency, coding system and receiver family should always match the installed automation.
BENINCA TO GO 2AK Features
- 2-channel transmitter
- 433.92 MHz operation
- ARC 128-bit rolling-code technology
- Fixed-code compatibility mode on AK family
- Replacement for selected older BENINCA transmitters
- Battery included on common package
BENINCA TO GO 2AK Technical Specifications
- Brand: BENINCA
- Model: TO GO 2AK
- Channels: 2
- Frequency: 433.92 MHz
- Coding: 128-bit ARC Rolling Code + Fixed Code mode
- Battery: A23 12V alkaline
- Typical Range: Receiver/site dependent
- Colour: Variant dependent
- Dimensions: Approx. 70 × 39 × 10 mm
BENINCA TO GO 2AK Kit Includes
- 1 × BENINCA TO GO 2AK remote control
- 1 × compatible battery
BENINCA TO GO 2AK Applications
- Automatic sliding gates
- Automatic swing gates
- Garage door openers
- Parking gate barriers
- Residential and commercial access automation
BENINCA TO GO 2AK Compatibility & Programming
Compatibility: Confirm the BENINCA receiver coding generation (fixed code, HCS rolling code or ARC) before programming. Same frequency alone is not sufficient.
Programming: Programming method depends on the transmitter family: DIP-switch matching for WP, receiver memorisation for rolling-code models, and ARC/fixed-code procedures for AK/VA families.
Why Choose BENINCA TO GO 2AK?
- Model-specific solution for compatible BENINCA radio systems
- Useful as a replacement or additional access-control component when compatibility is confirmed
- Designed for convenient wireless gate, garage or barrier operation
- Technical specifications and programming requirements researched for easier product selection
Why Choose Sliding Gate Motor UAE?
- Gate automation products and accessories supplied across the United Arab Emirates
- Compatibility assistance for remote controls, receivers and gate control boards
- Programming and technical support available for compatible automation systems
- Products for residential, commercial and industrial access applications
BENINCA TO GO 2AK FAQs
What frequency does BENINCA TO GO 2AK use?
BENINCA TO GO 2AK operates on 433.92 MHz. It uses 128-bit ARC Rolling Code + Fixed Code mode coding.
Is BENINCA TO GO 2AK compatible with my gate motor?
Confirm the BENINCA receiver coding generation (fixed code, HCS rolling code or ARC) before programming. Same frequency alone is not sufficient.
How do I program BENINCA TO GO 2AK?
Programming method depends on the transmitter family: DIP-switch matching for WP, receiver memorisation for rolling-code models, and ARC/fixed-code procedures for AK/VA families.
What battery does BENINCA TO GO 2AK use?
The listed battery is A23 12V alkaline.
Can BENINCA TO GO 2AK be used as an additional remote?
Yes, provided the installed receiver has available memory and the transmitter frequency/coding are compatible. It must be programmed using the correct receiver procedure.
Compatibility referencesCompatible & Related Models Mentioned for This Product
These links are created only from model references already stated in this product description. Confirm the exact model revision, voltage and receiver/control-board version before ordering.
