BFT VIRGO SMART BT A 20 – Italian Smart 24V Articulated-Arm Swing Gate Automation with Integrated Control
The BFT VIRGO SMART BT A20 is a compact Italian 24V articulated-arm operator for swing gates where wide pillars and residential architectural layouts require flexible motor geometry. It combines an integrated THALIA-based control concept, D-Track torque management and intensive-use capability.
Designed for professional automatic swing gate projects in the United Arab Emirates, BFT VIRGO SMART BT A 20 can be integrated with a correctly matched control board, remote controls, safety photocells, warning light and access-control accessories. Final motor selection should always consider the physical gate, hinge condition, pillar geometry, wind exposure, opening angle and expected operating frequency rather than relying on gate weight alone.
BFT VIRGO SMART BT A 20 Features
- Articulated-arm automation for gate leaves up to approximately 2 m
- Published gate capacity up to about 200 kg in suitable configuration
- 24V DC operation with up to approximately 110W absorbed power in referenced data
- Approx. 120° maximum opening angle
- Approx. 14-second movement under stated conditions
- Electromechanical limit management
- D-Track electronic torque control and obstacle management
- Mechanical locking with personal-key release
- Integrated / dedicated THALIA control architecture
- U-Link connectivity support on compatible system
- IP44 protection and -20°C to +55°C operating range
BFT VIRGO SMART BT A 20 Technical Specifications
| Model | BFT VIRGO SMART BT A20 |
| Product Reference | P930129 00002 |
| Motor Voltage | 24V DC |
| Maximum Absorbed Power | Approx. 110W |
| Maximum Gate Leaf Length | Up to approx. 2 m |
| Published Gate Capacity | Up to approx. 200 kg* |
| Maximum Opening Angle | Approx. 120° |
| Opening Time | Approx. 14 seconds |
| Limit System | Electromechanical |
| Torque / Obstacle Management | D-Track |
| Slowdown | Supported |
| Locking | Mechanical |
| Control | Integrated / THALIA family |
| Connectivity | U-Link supported on compatible architecture |
| Protection Rating | IP44 |
| Operating Temperature | -20°C to +55°C |
| Country of Origin | Italy |
BFT VIRGO SMART BT A 20 Kit Includes
The following package contents are based on researched complete-kit configurations for this model or the corresponding manufacturer kit:
- 2 x BFT VIRGO SMART BT A20 operators (master/slave configuration depending kit)
- 1 x Integrated / compatible THALIA control system
- 1 x Pair of safety photocells
- 1 x Flashing warning light
- 2 x BFT MITTO remote controls
- Manual release key(s)
- Mounting accessories
Kit contents may vary by market, stock package or manufacturer revision. Please confirm the exact supplied items before ordering, especially control boards, receiver models, remote-control types, foundation boxes or electric locks.
BFT VIRGO SMART BT A 20 Applications
- Villa gates with wide pillars
- Residential entrances
- Compact double swing gates
- Private compounds
- Smart gate automation requiring BFT D-Track and U-Link-compatible control
BFT VIRGO SMART BT A 20 Supply & Installation Services
For reliable operation, the gate should move freely by hand before automation is installed. The hinges, stops, posts or pillars and mounting points should be structurally sound. Correct motor geometry is particularly important on swing gates because bracket position directly affects actuator travel, leverage, opening angle and the load placed on the motor.
A professional installation normally includes motor and bracket positioning, control-panel wiring, limit or travel setup, remote-control programming, safety-photocell alignment, automatic-closing configuration where required, force or torque adjustment, manual-release testing and final commissioning. Electrical installation should follow the manufacturer's instructions and applicable site requirements.
BFT VIRGO SMART BT A 20 Compatible Accessories & Access Control
Depending on the selected BFT control board and product revision, BFT VIRGO SMART BT A 20 can be combined with compatible accessories such as:
- Manufacturer-compatible remote controls and radio receivers
- Infrared safety photocells and other supported safety devices
- Flashing / warning lights
- Push buttons and key switches
- GSM gate openers and dry-contact mobile access controllers
- Keypads, RFID readers, intercom systems and access-control relays
- Electric locks where required by gate length, wind load or manufacturer guidance
- Battery backup or low-voltage accessories where supported by the exact 24V control system
Accessory voltage, input type and radio compatibility should be checked before connection. Do not assume that an accessory from the same brand is compatible with every controller generation.
Why Choose BFT VIRGO SMART BT A 20?
BFT VIRGO SMART BT A 20 is suitable for customers looking for a model-specific BFT swing gate automation solution with documented technical parameters, established control electronics and the ability to integrate safety and access-control equipment. Its selection should be based on the actual gate dimensions and usage profile so the motor operates with an appropriate mechanical margin rather than continuously at its maximum limit.
Why Choose Us – Sliding Gate Motor UAE
- Technical assistance to match the motor with gate leaf length, weight, hinge geometry and expected usage
- Support identifying compatible control boards, remotes, photocells and access-control accessories
- Professional installation, programming and testing services subject to project location and availability
- Gate automation products and spare-part support for established international manufacturers
- Delivery support across the United Arab Emirates
- After-sales assistance for compatible automation equipment and system setup
BFT VIRGO SMART BT A 20 FAQs
What gate is BFT VIRGO SMART BT A 20 suitable for?
BFT VIRGO SMART BT A 20 should be selected according to gate leaf length (Up to approx. 2 m), gate weight/capacity (Up to approx. 200 kg*), hinge position, opening angle, wind loading, gate construction and expected daily usage. Published capacities assume a correctly aligned, freely moving gate and suitable installation geometry.
What power supply and control system does BFT VIRGO SMART BT A 20 use?
The researched configuration uses 24V DC. The referenced control platform is Integrated / THALIA family. The exact board, transformer and accessory wiring should always be confirmed against the supplied product revision before installation.
What is included with the BFT VIRGO SMART BT A 20 kit?
Researched complete-kit configurations commonly include 2 x BFT VIRGO SMART BT A20 operators (master/slave configuration depending kit), 1 x Integrated / compatible THALIA control system, 1 x Pair of safety photocells, 1 x Flashing warning light. Exact kit contents can vary by market, distributor and product revision, so the final supplied package should be confirmed on the quotation or order.
Can BFT VIRGO SMART BT A 20 be opened manually during a power failure?
Yes, the researched BFT automation configuration provides a manual or emergency release arrangement. The release method differs by operator type, so the installer should demonstrate the correct procedure after commissioning.
Can BFT VIRGO SMART BT A 20 work with photocells, remotes, GSM or access control?
Yes, when connected through the compatible BFT control system, the operator can be integrated with supported remote receivers, safety photocells, flashing lights, push buttons and access-control devices such as GSM controllers, keypads or intercom relays. Compatibility must be checked before wiring.
Is professional installation available for BFT VIRGO SMART BT A 20 in the United Arab Emirates?
Professional installation, setup, programming and testing can be arranged subject to product availability, project requirements and location. Correct bracket geometry, gate condition, safety-device positioning and final force/travel settings are important for reliable operation.
Need Help with BFT VIRGO SMART BT A 20?
For product selection, provide the gate leaf length, approximate gate weight, number of leaves, pillar and hinge dimensions, required opening angle, expected daily usage and clear photographs of the entrance. This information helps confirm whether BFT VIRGO SMART BT A 20 is suitable and which control, safety and access-control accessories should be included.
