BFT IGEA BT – Italian 24V Articulated-Arm Swing Gate Motor for Large Pillars and Intensive Use
The BFT IGEA BT is an Italian 24V articulated-arm operator designed for swing gates with large pillars or hinge positions that require a flexible arm geometry. It is suited to intensive-use residential and compatible commercial entrances, with D-Track torque management and THALIA control support.
Designed for professional automatic swing gate projects in the United Arab Emirates, BFT IGEA BT can be integrated with a correctly matched control board, remote controls, safety photocells, warning light and access-control accessories. Final motor selection should always consider the physical gate, hinge condition, pillar geometry, wind exposure, opening angle and expected operating frequency rather than relying on gate weight alone.
BFT IGEA BT Features
- Articulated arm design for large pillars and challenging hinge offsets
- Gate leaves up to approximately 2.5 m with published capacity around 250 kg in suitable geometry
- 24V DC motor with approximately 40W power consumption
- Opening angle up to approximately 125°
- Approx. 15-second operation under stated conditions
- Electromechanical limit system
- D-Track torque and obstacle management
- Slowdown support
- Mechanical locking and personal-key manual release
- Intensive-use rating
- IP44 protection and approximately -15°C to +60°C range
- Compatible with THALIA / THALIA BT A80 family control
BFT IGEA BT Technical Specifications
| Model | BFT IGEA BT |
| Product Reference | P935070 00002 |
| Motor Voltage | 24V DC |
| Power Consumption | Approx. 40W |
| Maximum Gate Leaf Length | Up to approx. 2.5 m |
| Published Gate Capacity | Approx. 250 kg* |
| Maximum Opening Angle | Approx. 125° |
| Opening Time | Approx. 15 seconds |
| Limit System | Electromechanical |
| Torque / Obstacle Management | D-Track |
| Slowdown | Yes |
| Locking | Mechanical |
| Manual Release | Personal key |
| Frequency of Use | Intensive |
| Protection Rating | IP44 |
| Operating Temperature | Approx. -15°C to +60°C |
| Control Units | THALIA / THALIA BT A80 |
| Country of Origin | Italy |
BFT IGEA BT Kit Includes
The following package contents are based on researched complete-kit configurations for this model or the corresponding manufacturer kit:
- 2 x BFT IGEA BT articulated swing gate motors
- 1 x BFT THALIA compatible control panel
- 2 x BFT MITTO remote controls
- 1 x Pair of safety photocells
- 1 x LED / compatible flashing warning light
- Mounting brackets and installation accessories
Kit contents may vary by market, stock package or manufacturer revision. Please confirm the exact supplied items before ordering, especially control boards, receiver models, remote-control types, foundation boxes or electric locks.
BFT IGEA BT Applications
- Wide-pillar villa gates
- Residential compounds
- Commercial swing gates with deep hinge setback
- Double-leaf articulated-arm gate automation
- High-use entrances requiring 24V control
BFT IGEA BT Supply & Installation Services
For reliable operation, the gate should move freely by hand before automation is installed. The hinges, stops, posts or pillars and mounting points should be structurally sound. Correct motor geometry is particularly important on swing gates because bracket position directly affects actuator travel, leverage, opening angle and the load placed on the motor.
A professional installation normally includes motor and bracket positioning, control-panel wiring, limit or travel setup, remote-control programming, safety-photocell alignment, automatic-closing configuration where required, force or torque adjustment, manual-release testing and final commissioning. Electrical installation should follow the manufacturer's instructions and applicable site requirements.
BFT IGEA BT Compatible Accessories & Access Control
Depending on the selected BFT control board and product revision, BFT IGEA BT can be combined with compatible accessories such as:
- Manufacturer-compatible remote controls and radio receivers
- Infrared safety photocells and other supported safety devices
- Flashing / warning lights
- Push buttons and key switches
- GSM gate openers and dry-contact mobile access controllers
- Keypads, RFID readers, intercom systems and access-control relays
- Electric locks where required by gate length, wind load or manufacturer guidance
- Battery backup or low-voltage accessories where supported by the exact 24V control system
Accessory voltage, input type and radio compatibility should be checked before connection. Do not assume that an accessory from the same brand is compatible with every controller generation.
Why Choose BFT IGEA BT?
BFT IGEA BT is suitable for customers looking for a model-specific BFT swing gate automation solution with documented technical parameters, established control electronics and the ability to integrate safety and access-control equipment. Its selection should be based on the actual gate dimensions and usage profile so the motor operates with an appropriate mechanical margin rather than continuously at its maximum limit.
Why Choose Us – Sliding Gate Motor UAE
- Technical assistance to match the motor with gate leaf length, weight, hinge geometry and expected usage
- Support identifying compatible control boards, remotes, photocells and access-control accessories
- Professional installation, programming and testing services subject to project location and availability
- Gate automation products and spare-part support for established international manufacturers
- Delivery support across the United Arab Emirates
- After-sales assistance for compatible automation equipment and system setup
BFT IGEA BT FAQs
What gate is BFT IGEA BT suitable for?
BFT IGEA BT should be selected according to gate leaf length (Up to approx. 2.5 m), gate weight/capacity (Approx. 250 kg*), hinge position, opening angle, wind loading, gate construction and expected daily usage. Published capacities assume a correctly aligned, freely moving gate and suitable installation geometry.
What power supply and control system does BFT IGEA BT use?
The researched configuration uses 24V DC. The referenced control platform is THALIA / THALIA BT A80. The exact board, transformer and accessory wiring should always be confirmed against the supplied product revision before installation.
What is included with the BFT IGEA BT kit?
Researched complete-kit configurations commonly include 2 x BFT IGEA BT articulated swing gate motors, 1 x BFT THALIA compatible control panel, 2 x BFT MITTO remote controls, 1 x Pair of safety photocells. Exact kit contents can vary by market, distributor and product revision, so the final supplied package should be confirmed on the quotation or order.
Can BFT IGEA BT be opened manually during a power failure?
Yes, the researched BFT automation configuration provides a manual or emergency release arrangement. The release method differs by operator type, so the installer should demonstrate the correct procedure after commissioning.
Can BFT IGEA BT work with photocells, remotes, GSM or access control?
Yes, when connected through the compatible BFT control system, the operator can be integrated with supported remote receivers, safety photocells, flashing lights, push buttons and access-control devices such as GSM controllers, keypads or intercom relays. Compatibility must be checked before wiring.
Is professional installation available for BFT IGEA BT in the United Arab Emirates?
Professional installation, setup, programming and testing can be arranged subject to product availability, project requirements and location. Correct bracket geometry, gate condition, safety-device positioning and final force/travel settings are important for reliable operation.
Need Help with BFT IGEA BT?
For product selection, provide the gate leaf length, approximate gate weight, number of leaves, pillar and hinge dimensions, required opening angle, expected daily usage and clear photographs of the entrance. This information helps confirm whether BFT IGEA BT is suitable and which control, safety and access-control accessories should be included.
