BFT E5 BT A18 – Italian Compact 24V Articulated Swing Gate Automation for Pedestrian-Scale and Light Gates
The BFT E5 BT A18 is a compact Italian 24V electromechanical swing gate operator intended for lighter gate leaves where an articulated or sliding arm arrangement is advantageous. Its absolute encoder and D-Track torque management support precise position control and safe movement in compact residential installations.
Designed for professional automatic swing gate projects in the United Arab Emirates, BFT E5 BT A18 can be integrated with a correctly matched control board, remote controls, safety photocells, warning light and access-control accessories. Final motor selection should always consider the physical gate, hinge condition, pillar geometry, wind exposure, opening angle and expected operating frequency rather than relying on gate weight alone.
BFT E5 BT A18 Features
- Suitable for gate leaves up to approximately 1.8 m and published weights around 100 kg in suitable geometry
- 24V DC motor with referenced maximum absorbed power around 100W
- Compact articulated-arm architecture with optional arm configurations depending installation
- Approx. 14-second operation under stated conditions
- Absolute encoder for precise position feedback
- BFT D-Track torque and obstacle management
- Compatible with THALIA / THALIA BT A80 control systems
- IP44 protection and -20°C to +55°C operating range
- Manual release for emergency access
- Designed for residential and light-access applications
BFT E5 BT A18 Technical Specifications
| Model | BFT E5 BT A18 |
| Motor Voltage | 24V DC |
| Referenced Power | Approx. 100W |
| Maximum Gate Leaf Length | Up to approx. 1.8 m |
| Published Gate Capacity | Approx. 100 kg* |
| Opening Time | Approx. 14 seconds |
| Position Feedback | Absolute encoder |
| Torque / Obstacle Management | D-Track |
| Control Units | THALIA / THALIA BT A80 |
| Protection Rating | IP44 |
| Operating Temperature | -20°C to +55°C |
| Arm Options | Articulated / compatible slide-arm configurations depending installation |
| Country of Origin | Italy |
BFT E5 BT A18 Kit Includes
The following package contents are based on researched complete-kit configurations for this model or the corresponding manufacturer kit:
- 2 x BFT E5 BT A18 swing gate operators
- 1 x BFT THALIA BT A80 / compatible control panel
- 1 x Pair of safety photocells
- 1 x Flashing warning light with antenna
- 2 x BFT remote controls
- 1 x Push button
- Fixing and wall bracket sets
Kit contents may vary by market, stock package or manufacturer revision. Please confirm the exact supplied items before ordering, especially control boards, receiver models, remote-control types, foundation boxes or electric locks.
BFT E5 BT A18 Applications
- Light villa swing gates
- Pedestrian-scale automatic gates
- Small residential entrances
- Architectural gates with restricted actuator space
- Compact swing gate automation requiring encoder feedback
BFT E5 BT A18 Supply & Installation Services
For reliable operation, the gate should move freely by hand before automation is installed. The hinges, stops, posts or pillars and mounting points should be structurally sound. Correct motor geometry is particularly important on swing gates because bracket position directly affects actuator travel, leverage, opening angle and the load placed on the motor.
A professional installation normally includes motor and bracket positioning, control-panel wiring, limit or travel setup, remote-control programming, safety-photocell alignment, automatic-closing configuration where required, force or torque adjustment, manual-release testing and final commissioning. Electrical installation should follow the manufacturer's instructions and applicable site requirements.
BFT E5 BT A18 Compatible Accessories & Access Control
Depending on the selected BFT control board and product revision, BFT E5 BT A18 can be combined with compatible accessories such as:
- Manufacturer-compatible remote controls and radio receivers
- Infrared safety photocells and other supported safety devices
- Flashing / warning lights
- Push buttons and key switches
- GSM gate openers and dry-contact mobile access controllers
- Keypads, RFID readers, intercom systems and access-control relays
- Electric locks where required by gate length, wind load or manufacturer guidance
- Battery backup or low-voltage accessories where supported by the exact 24V control system
Accessory voltage, input type and radio compatibility should be checked before connection. Do not assume that an accessory from the same brand is compatible with every controller generation.
Why Choose BFT E5 BT A18?
BFT E5 BT A18 is suitable for customers looking for a model-specific BFT swing gate automation solution with documented technical parameters, established control electronics and the ability to integrate safety and access-control equipment. Its selection should be based on the actual gate dimensions and usage profile so the motor operates with an appropriate mechanical margin rather than continuously at its maximum limit.
Why Choose Us – Sliding Gate Motor UAE
- Technical assistance to match the motor with gate leaf length, weight, hinge geometry and expected usage
- Support identifying compatible control boards, remotes, photocells and access-control accessories
- Professional installation, programming and testing services subject to project location and availability
- Gate automation products and spare-part support for established international manufacturers
- Delivery support across the United Arab Emirates
- After-sales assistance for compatible automation equipment and system setup
BFT E5 BT A18 FAQs
What gate is BFT E5 BT A18 suitable for?
BFT E5 BT A18 should be selected according to gate leaf length (Up to approx. 1.8 m), gate weight/capacity (Approx. 100 kg*), hinge position, opening angle, wind loading, gate construction and expected daily usage. Published capacities assume a correctly aligned, freely moving gate and suitable installation geometry.
What power supply and control system does BFT E5 BT A18 use?
The researched configuration uses 24V DC. The referenced control platform is THALIA / THALIA BT A80. The exact board, transformer and accessory wiring should always be confirmed against the supplied product revision before installation.
What is included with the BFT E5 BT A18 kit?
Researched complete-kit configurations commonly include 2 x BFT E5 BT A18 swing gate operators, 1 x BFT THALIA BT A80 / compatible control panel, 1 x Pair of safety photocells, 1 x Flashing warning light with antenna. Exact kit contents can vary by market, distributor and product revision, so the final supplied package should be confirmed on the quotation or order.
Can BFT E5 BT A18 be opened manually during a power failure?
Yes, the researched BFT automation configuration provides a manual or emergency release arrangement. The release method differs by operator type, so the installer should demonstrate the correct procedure after commissioning.
Can BFT E5 BT A18 work with photocells, remotes, GSM or access control?
Yes, when connected through the compatible BFT control system, the operator can be integrated with supported remote receivers, safety photocells, flashing lights, push buttons and access-control devices such as GSM controllers, keypads or intercom relays. Compatibility must be checked before wiring.
Is professional installation available for BFT E5 BT A18 in the United Arab Emirates?
Professional installation, setup, programming and testing can be arranged subject to product availability, project requirements and location. Correct bracket geometry, gate condition, safety-device positioning and final force/travel settings are important for reliable operation.
Need Help with BFT E5 BT A18?
For product selection, provide the gate leaf length, approximate gate weight, number of leaves, pillar and hinge dimensions, required opening angle, expected daily usage and clear photographs of the entrance. This information helps confirm whether BFT E5 BT A18 is suitable and which control, safety and access-control accessories should be included.
