BENINCA DU 350N Swing Gate Motor UAE

BENINCA DU 350N – Italian Underground Swing Gate Engineering for Discreet Heavy-Duty Automation

The BENINCA DU 350N is an Italian underground electromechanical swing gate operator designed for installations where the motor should remain concealed below ground level. Its 230V drive, high output torque and oil-lubricated mechanical system make it suitable for substantial residential and compatible commercial gates.

Designed for professional automatic swing gate projects in the United Arab Emirates, BENINCA DU 350N can be integrated with a correctly matched control board, remote controls, safety photocells, warning light and access-control accessories. Final motor selection should always consider the physical gate, hinge condition, pillar geometry, wind exposure, opening angle and expected operating frequency rather than relying on gate weight alone.

DU 350N Features

• Underground operator for a clean architectural appearance
• Designed for gate leaves up to approximately 4 m when correctly sized
• 230V AC operation with approximately 1.7A current in official technical data
• Maximum torque approximately 450 Nm
• Approx. 22-second operating time
• Intensive-use rating
• Oil-lubricated internal mechanical components
• IP67 protection for underground installation
• Compatible with BENINCA BRAINY / BRAINY PLUS control electronics
• Manual release and foundation-box system available in complete kits
• Suitable for double-leaf premium gate automation

DU 350N Technical Specifications

DU 350N Kit Includes

The following package contents are based on researched complete-kit configurations for this model or the corresponding manufacturer kit:

• 2 x BENINCA DU 350N underground swing gate operators
• 2 x Underground foundation boxes
• 2 x Mechanical stop sets
• 2 x Manual release systems
• 1 x BENINCA BRAINY control panel
• 1 x Pair of BENINCA PUPILLA photocells
• 1 x AW 433.92 MHz aerial
• 2 x BENINCA TO.GO2WV remote controls

Kit contents may vary by market, stock package or manufacturer revision. Please confirm the exact supplied items before ordering, especially control boards, receiver models, remote-control types, foundation boxes or electric locks.

DU 350N Applications

• Premium villa gates
• Architectural swing gates requiring hidden motors
• Residential compounds
• Commercial property entrances
• Double-leaf underground gate automation

DU 350N Supply & Installation Services

For reliable operation, the gate should move freely by hand before automation is installed. The hinges, stops, posts or pillars and mounting points should be structurally sound. Correct motor geometry is particularly important on swing gates because bracket position directly affects actuator travel, leverage, opening angle and the load placed on the motor.

A professional installation normally includes motor and bracket positioning, control-panel wiring, limit or travel setup, remote-control programming, safety-photocell alignment, automatic-closing configuration where required, force or torque adjustment, manual-release testing and final commissioning. Electrical installation should follow the manufacturer's instructions and applicable site requirements.

BENINCA DU 350N Compatible Accessories & Access Control

Depending on the selected BENINCA control board and product revision, BENINCA DU 350N can be combined with compatible accessories such as:

• Manufacturer-compatible remote controls and radio receivers
• Infrared safety photocells and other supported safety devices
• Flashing / warning lights
• Push buttons and key switches
• GSM gate openers and dry-contact mobile access controllers
• Keypads, RFID readers, intercom systems and access-control relays
• Electric locks where required by gate length, wind load or manufacturer guidance
• Battery backup or low-voltage accessories where supported by the exact 24V control system

Accessory voltage, input type and radio compatibility should be checked before connection. Do not assume that an accessory from the same brand is compatible with every controller generation.

Why Choose BENINCA DU 350N?

BENINCA DU 350N is suitable for customers looking for a model-specific BENINCA swing gate automation solution with documented technical parameters, established control electronics and the ability to integrate safety and access-control equipment. Its selection should be based on the actual gate dimensions and usage profile so the motor operates with an appropriate mechanical margin rather than continuously at its maximum limit.

Why Choose Us – Sliding Gate Motor UAE

• Technical assistance to match the motor with gate leaf length, weight, hinge geometry and expected usage
• Support identifying compatible control boards, remotes, photocells and access-control accessories
• Professional installation, programming and testing services subject to project location and availability
• Gate automation products and spare-part support for established international manufacturers
• Delivery support across the United Arab Emirates
• After-sales assistance for compatible automation equipment and system setup

DU 350N FAQs

What gate is BENINCA DU 350N suitable for?

BENINCA DU 350N should be selected according to gate leaf length (Up to approx. 4 m*), hinge position, opening angle, wind loading, gate construction and expected daily usage. Published capacities assume a correctly aligned, freely moving gate and suitable installation geometry.

What power supply and control system does BENINCA DU 350N use?

The researched configuration uses 230V AC, 50-60Hz. The referenced control platform is BRAINY / BRAINY PLUS family. The exact board, transformer and accessory wiring should always be confirmed against the supplied product revision before installation.

What is included with the BENINCA DU 350N kit?

Researched complete-kit configurations commonly include 2 x BENINCA DU 350N underground swing gate operators, 2 x Underground foundation boxes, 2 x Mechanical stop sets, 2 x Manual release systems. Exact kit contents can vary by market, distributor and product revision, so the final supplied package should be confirmed on the quotation or order.

Can BENINCA DU 350N be opened manually during a power failure?

Yes, the researched BENINCA automation configuration provides a manual or emergency release arrangement. The release method differs by operator type, so the installer should demonstrate the correct procedure after commissioning.

Can BENINCA DU 350N work with photocells, remotes, GSM or access control?

Yes, when connected through the compatible BENINCA control system, the operator can be integrated with supported remote receivers, safety photocells, flashing lights, push buttons and access-control devices such as GSM controllers, keypads or intercom relays. Compatibility must be checked before wiring.

Is professional installation available for BENINCA DU 350N in the United Arab Emirates?

Professional installation, setup, programming and testing can be arranged subject to product availability, project requirements and location. Correct bracket geometry, gate condition, safety-device positioning and final force/travel settings are important for reliable operation.

Need Help with BENINCA DU 350N?

For product selection, provide the gate leaf length, approximate gate weight, number of leaves, pillar and hinge dimensions, required opening angle, expected daily usage and clear photographs of the entrance. This information helps confirm whether BENINCA DU 350N is suitable and which control, safety and access-control accessories should be included.