BENINCA BILL30M – Italian engineering for decorative gates up to 2.5 m
A 230V irreversible linear operator for wrought-iron and decorative leaves up to 2.5 m. Its protected stainless-steel stem and compact housing suit entrances where a discreet installation matters.
BENINCA BILL30M provides automatic opening and closing for a correctly matched swing gate installation. Choose the configuration according to the individual leaf dimensions, hinge position, opening direction and expected number of daily cycles.
BENINCA BILL30M is part of the BENINCA swing gate automation range and is intended for correctly sized hinged gates. For a UAE installation, the choice of motor depends on the length and mass of each gate leaf, hinge offset, pillar clearance, desired opening angle, wind exposure and frequency of use. A suitable control board and safety devices are important for reliable operation.
BENINCA BILL30M Features
- Stem scraper ring
- Manual release accessible from above
- Left- and right-hand versions
- 2800 N maximum thrust
BENINCA BILL30M Technical Specifications
- Model: BILL30M
- Brand: BENINCA
- Device Type: Swing Gate Opener
- Power Supply: 230 Vac (50–60 Hz)
- Motor Supply: 230 Vac
- Maximum Thrust: 2800 N
- Opening Time: 16 Seconds
- Standard Stroke: 300 mm
- Maximum Stroke: 320 mm
- Duty Cycle: 30%
- Protection Level: IP54
- Built-in Control Unit: No
- Lubrication: Grease
- Operating Temperature: -20°C to +50°C
- Maximum Leaf Length: 2.5 m
- Motor Weight: 6.1 KG
- Kit Weight: 14.6 KG
- Country of Origin: Made in Italy
Published maximum leaf length and weight are selection limits, not a guarantee that both maxima can be used together. Confirm the exact model revision, permitted load curve and mounting dimensions before installation.
BENINCA BILL30M Kit Includes
- 2 × BILL30M Irreversible 230 Vac Electromechanical Geared Motors
- 1 × HEADY Control Unit 230 Vac with Integrated Receiver
- 1 × PUPILLA.T Pair of Adjustable Photocells
- 1 × LAMPY Flashing Light with Integrated Antenna
- 2 × TO.GO2VA 2-Channel 433.92 MHz Remote Controls
- 2 × Fixing Brackets
- 1 × Exit Push Button
- 2 × Manual Release Keys
The listed package reflects the referenced kit configuration. Confirm the exact motor quantity, controller, receiver and accessories on the quotation before ordering.
BENINCA BILL30M Applications
Use BENINCA BILL30M for hinged vehicle entrances that fall within its specified dimensions and duty rating. Suitable projects may include private villas, residential compounds and compatible commercial entrances. A site assessment should check wind exposure, gate infill, hinge condition and clear movement space.
BENINCA BILL30M Supply & Installation Services
The gate should move freely by hand before fitting the drive. The installer must check bracket or foundation geometry, mechanical stops, cable routes and the required electrical supply, then set travel and force parameters according to the supplied manual.
Remote receivers, photocells, warning lights, intercom relays, keypads and GSM or WiFi interfaces must match the selected controller. Test the safety inputs and manual release, where fitted, before handing over the system. Optional smart or backup equipment should be confirmed for the exact controller version.
Why Choose BENINCA BILL30M?
BENINCA BILL30M is a specialist swing gate automation option for projects where the correct actuator type, gate-leaf dimensions, mounting geometry and intended usage are essential. Choosing the appropriate model helps deliver reliable movement, easier access and compatibility with correctly selected safety and control accessories. Our team can help compare this motor with alternatives for your gate.
BENINCA BILL30M FAQs
How do I check whether BENINCA BILL30M fits my gate?
Compare the technical details above with each leaf’s length, weight and mounting geometry. Also provide gate photographs, hinge measurements and expected daily usage so the correct configuration can be confirmed.
What is supplied with this product?
See the kit list above. Final contents should be confirmed on the order because controller and accessory packages can vary.
Can it connect to remote or smart access control?
Access devices can be added when their electrical output and radio or communication protocol match the selected control unit. Confirm compatibility before purchasing a WiFi, GSM, intercom or keypad accessory.
Is installation available across the UAE?
Professional installation, setup, programming and testing can be arranged subject to location and project requirements. Contact our team for availability and service charges.
Why Choose Us – Sliding Gate Motor UAE
Get assistance with model selection, compatible accessories and installation requirements, plus delivery support across Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah, Umm Al Quwain and Al Ain. Send the gate dimensions and site photographs to help our team prepare an appropriate supply configuration.
